NV SATA 2 Secondary RAID
Enabled | Enable RAID function for the second channel of the second SATA controller. (Default value) |
Disabled | Disable the RAID function of this channel. It will operate in ATA mode. |
On-Chip IDE Channel0
Enabled | Enable onboard first channel IDE port. (Default value) |
Disabled | Disable onboard first channel IDE port. |
On-Chip MAC LAN
Disabled | Disable the LAN controller |
Auto | Enable the LAN controller |
NV Serial-ATA Controller
Disabled | Disable the 2 SATA controllers. |
| Enable the first SATA controller only. |
All Enabled | Enable the 2 SATA controllers. (Default value) |
IDE Prefetch Mode
Enabled | Enable IDE data buffer to enhance HDD transfer speed. (Default value) |
Disabled | Disable IDE data buffer for the system stability. |
Onboard Audio Function
Auto |
|
| ||||||
Disabled |
| Disable this function. |
|
|
|
|
| |
SMART LAN |
|
|
|
|
|
|
| |
|
|
|
| |||||
|
| CMOS Setup |
| |||||
|
|
|
| SMART LAN |
|
|
| |
Start detecting at Port |
|
|
|
| Item Help | |||
= | Normal | / | Length | = | N/A | Menu Level | ||
= | Normal | / | Length | = | N/A |
|
| |
= | Normal | / | Length | = | N/A |
|
| |
= | Normal | / | Length | = | N/A |
|
| |
: Move | Enter: Select | F10: Save |
| ESC: Exit | F1: General Help | |||
F5: Previous Values | F6: |
|
| F7: Optimized Defaults | ||||
|
|
|
|
|
|
|
|
|
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable:
English
- 37 - | BIOS Setup |