AMD GA-M51GM-S2G Password Check, HDD S.M.A.R.T. Capability, Init Display First, Frame Buffer Size

English

Password Check

System	The system can not boot and can not access to Setup page will be
	denied if the correct password is not entered at the prompt.
Setup	The system will boot, but access to Setup will be denied if the correct
	password is not entered at the prompt. (Default value)

HDD S.M.A.R.T. Capability

This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed.

Enabled	Enabled HDD S.M.A.R.T. capability.
Disabled	Disabled HDD S.M.A.R.T. capability.(Default value)

Init Display First

This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.

PCI Slot	Set Init Display First to PCI VGA card.
Onboard VGA	Set Init Display First to onboard VGA.
PEG	Set Init Display First to PCI Express VGA card.(Default value)

Frame Buffer Size

16MB	Set On-chip frame buffer size to 16MB.
32MB	Set On-chip frame buffer size to 32MB.
64MB	Set On-chip frame buffer size to 64MB.(Default value)
128MB	Set On-chip frame buffer size to 128MB.
Disabled	Disable this function.

Onboard GPU

Enable If No Ext PEG	Output from the onboard GPU when no PCI Express VGA card is
	installed. (Default value)
Always Enable	Always output from the onboard GPU.

GA-M51GM-S2G Motherboard - 36 -