AMD GA-M51GM-S2G user manual Nvidia Mirror

Step 2:

If you do not create RAID, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you wish to install Microsoft Windows 2000/XP. You should see a screen similar to Figure 3 below.

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Hard Disk Boot Priority

1. CH2 M	:	ST3120026AS	Item Help
2. CH3 M	:	ST3120026AS	Menu Level
3. Bootable Add-in Cards
			Use < > or < > to
			select a device, then
			press <+> to move it
			up, or <-> to move it
			down the list. Press
			<ESC> to exit this
			menu.
: Move	PU/PD/+/-: Change Priority	F10: Save	ESC: Exit

Figure 3

After configuring the SATA controller mode in system BIOS, if you wish to create RAID, save the settings and exit. Then go to RAID BIOS (refer to page 69) to configure the RAID array. After finished, re-enter the system BIOS Setup to set hard disk boot priority before OS installation. Select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the RAID array onto which you wish to install Microsoft Windows 2000/XP (Figure 4).

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Hard Disk Boot Priority

1. SCSI -0	NVIDIA MIRROR 111.7		Item Help
2. Bootable Add-in Cards			Menu Level
			Use < > or < > to
			select a device, then
			press <+> to move it
			up, or <-> to move it
			down the list. Press
			<ESC> to exit this
			menu.
: Move	PU/PD/+/-: Change Priority	F10: Save	ESC: Exit

Figure 4

English

- 67 - Appendix