PC Health Status |
|
|
|
| ||
|
| CMOS Setup |
| |||
|
|
| PC Health Status |
|
| |
| Reset Case Open Status | [Disabled] |
|
| Item Help | |
| Case Opened |
| Yes |
| Menu Level ` | |
| Vcore |
| OK |
|
|
|
| DDR18V |
| OK |
| [Disabled] | |
| +3.3V |
| OK |
| Don’t reset case | |
| +12V |
| OK |
| open status | |
| Current System Temperature | 32oC |
|
|
| |
| Current CPU Temperature | 45oC |
| [Enabled] | ||
| Current CPU FAN Speed | 3245 RPM |
| Clear case open status | ||
| Current SYSTEM FAN Speed | 0 RPM |
| and set to be Disabled | ||
| System Warning Temperature | [Disabled] |
| at next boot | ||
| CPU Warning Temperature | [Disabled] |
|
|
| |
| CPU FAN Fail Warning | [Disabled] |
|
|
| |
| CPU Smart FAN Control | [Enabled] |
|
|
| |
| CPU Smart FAN Mode | [Auto] |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
| |
| Reset Case Open Status |
|
|
|
| |
| Disabled | Don't reset case open status. (Default value) |
| |||
| Enabled | Clear case open status at next boot. |
|
| ||
Case Opened
If the case is closed, Case Opened will show "No." If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR18V / +3.3V / +12V
Detect system's voltage status automatically.
Current System/CPU Temperature
Detect system/CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/system fan speed status automatically.
System/CPU Warning Temperature
60oC / 140oF | Monitor System/CPU temperature at 60oC / 140oF. |
70oC / 158oF | Monitor System/CPU temperature at 70oC / 158oF. |
80oC / 176oF | Monitor System/CPU temperature at 80oC / 176oF. |
90oC / 194oF | Monitor System/CPU temperature at 90oC / 194oF. |
Disabled | Disable this function. (Default value) |
CPU FAN Fail Warning | |
Disabled | Disable CPU fan fail warning function. (Default value) |
Enabled | Enable CPU fan fail warning function. |
CPU Smart FAN Control(Note) | |
Disabled | Disable this function. |
Enabled | When this function is enabled, CPU fan will run at different speed depending |
| on CPU temperature. Users can adjust the fan speed with Easy Tune |
| based on their requirements. (Default value) |
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
- 41 - | BIOS Setup |
English