AMD GA-M61PM-S2 user manual Bbs

English

After that, the Array List screen displaying the RAID array you created will appear (Figure 8).

(Note: BBS stands for BIOS Boot Specification. This indicates that the boot device is defined in the BIOS.)

MediaShield Utility May 22 2006

- Array List -

Boot	Status		Vendor	Array Model Name
BBS	Healthy		NVIDIA	STRIPE 223.57G
[Ctrl-X] Exit	[ ] Select	[B] Set Boot		[N] New Array [ENTER] Detail

Figure 8

To read more information about the RAID array, press ENTER to enter the Array Detail screen (Figure 9), where you should see detailed information about RAID mode, disk block size, disk model name, and disk capacity, etc.

		Array 1: NVIDIA STRIPE 233.57G
		- Array Detail -
RAID Mode: Striping
Striping Width : 2		Striping Block: 64K
Port	Index	Disk Model	Capacity
1	0	ST3120026AS	111.79GB
2	1	ST3120026AS	111.79GB
	[R] Rebuild	[D] Delete [C] Clear Disk	[ENTER] Return

Figure 9

To delete the array, press D in the Array Detail screen. When the "Delete this array?" message appears, press Y to confirm or N to cancel. Press ENTER to return to the Array List screen.

To exit the Nvidia RAID utility, press ESC in the main menu or Ctrl+X in the Array List screen.

Now, you can proceed to install the SATA controller driver and operating system.

GA-M61PM-S2 Motherboard - 66 -