Specifications for the Optional NWA-EXT, Nwa-Ext

Installation

AXR-NWS (rear view)

Controller (rear view)

Mini AXlink connector (3.5 mm)

FIG. 7 AXR-NWS connection to a Controller

The AXR-NWS does not support devices which previously used the AXR-WAVES server. AXR-NWS uses a 2.4 GHz digital spread spectrum to avoid common problems associated with RF control. However, avoid placing the AXR-NWS components next to microwave ovens, spread-spectrum, consumer microwave video link transceivers, projectors using Halide/Xenon lamps, or AXR-WAVES Server

(at least 10 ft. away).

Specifications for the Optional NWA-EXT

NWA-EXT

(External Netware Antenna)

•6 ft coax with various connectors allow maximum flexibility in placement

•1/2 wave coaxial dipole

•Frequency: 2.4-2.5 GHz

•Polarization: Vertical

•Nominal Impedence: 50 ohms

•VSWR 1.5:1 max at resonance

•RF Power Handling: 50 watts

•Temperature Range: -40ºC to +85ºC

Installing the Optional NWA-EXT External Extended Range Antenna

1.Unscrew the extended range antenna (that comes shipped with the AXR-NWS) from the rear coaxial connector on the NWS unit by twisitng the connector is a counter-clockwise direction.

2.Connect the NWA-EXT antenna to the rear of the NWS by inserting the terminal coaxial connector and twisting it in a clockwise direction.

Verify that the antenna is not being obstructed by any other device or receiving interference form anothersource.

AXR-NWS NetWave Server	9