Computer, Slides, Barcode Reader

Using the TX-CTB

Computer

To control the CD-I mouse, use the buttons labeled in yellow. Then, press one of the eight outer number buttons (1 – 4 or 6 – 9). For information on the Speed and how to activate functions refer to the CD-I Player subsection.

Slides

To control video slide projectors and still video players, use the following buttons::

PLAY (slides on)

STOP (slides off)

PAUSE (still video standby)

FFWD (zoom in)

REV (zoom out)

FWD (forward)

REV (reverse)

Barcode Reader

To read a barcode:

1.Press READ. The LED turns green.

2.Hold the TX-CTB so the reader is perpendicular to the barcode.

3.Swipe the reader over the barcode until the TX-CTB beeps once. Follow these guidelines:

!If it does not beep, do not lift the reader from the page; swipe the reader over the barcode in the other direction.

!It may take more than one pass, or it may take a pass in theother direction to read the barcode.

4.After the TX-CTB beeps once, point it at the AXB-TM5.

5.Press SEND. The LED turns yellow when the TX-CTB transmits the data.

After five seconds of inactivity, the TX-CTB beeps twice and returns to normal IR operation.

	6	TX-CTB Classroom Transmitter and Barcode Reader