Office, Security, or Media Center Control, Media Mode

Using the TX-CTB

Media Mode

Media Mode is active whenever there is a media source, broadcast channel, or media plan scheduled to a classroom. You can select up to 10 sources.

!	Press SOURCE	(up) to pause current media, select next source assignment, and
	play assigned media source.
!	Press SOURCE	(down) to pause current media, select previous source assignment,
	and play assigned media source.

Office, Security, or Media Center Control

Calls

There are two different kinds of calls that you can send:

!Office: To send a general emergency call signal to the Paging Console (AXP-PC) or to a Security Panel (AXU-SPL4) press OFFICE then ENTER. To clear the call before you receive a response press OFFICE then CLEAR.

!Media: To send a general call to the media center's computer press MEDIA then ENTER.

System Media Control

The TX-CTB has a standard set of motion control buttons located on the right side.

Motion

To control the motion of the media, use the following seven buttons:

PLAY

STOP

PAUSE

FFWD (Fast forward)

REV (Rewind)

FWD (Step forward)

REV (Step reverse)

	4	TX-CTB Classroom Transmitter and Barcode Reader