Laser Disc, CD-I Player | AMX TX-CTB guide

Using the TX-CTB

Laser Disc

The selected source must accept a Chapter and/or Frame command.

!Chapter: To play a specific chapter, press CHAPTER, the chapter number then ENTER.

!Frame: To play a specified frame, press FRAME, the fame number, then ENTER.

!Clear: To cancel commands, press CLEAR, then ENTER.

!Audio: To control audio, press ALT and one of the following number buttons:

1Left channel (analog)

2Right channel (analog)

3Both channels

4All channels mute (analog)

5Left channel (digital)

6Right channel (digital)

7Both channels (digital)

8All channels mute (digital)

9Text display on

0 Side A/B select (if available)

VCR

1.To access an optional feature, press ALT,

2.Then, choose one of the following number buttons and press ENTER:

4Tracking up

5Tracking down

6Reset counter

7Clear

9 Text display on/off

CD-I Player

To control the CD-I mouse, use the buttons labeled in yellow. Then, press one of the eight outer number buttons (1 – 4 or 6 – 9). Select from four mouse speeds.

5 increases mouse speed while 0 decreases it.

To activate CD-I functions:

!Press the right button (ENTER) or the left button (CLEAR) to activate the first CD- I function button.

!Press the right button (FRAME) or the left button (CHAPTER) to activate the second CD-I function button.

TX-CTB Classroom Transmitter and Barcode Reader	5