Antec P190 user manual To remove the front filters, To remove the side filter

To remove the front filters:

1.Push one of the fan grilles at the right middle edge to open the grille.

2.There are two tabs on the filter. To remove the filter, use both hands to gen- tly push the tabs downward. Slightly angle the top of the filter towards you before lifting it up and out.

To remove the side filter:

1.Open the side panel and disconnect the Molex fan connector from the fan carefully.

2.Slide the filter out

For more useful suggestions and advice on building this case please visit Antec’s FAQ’s at www.antec.com.

8