![](/images/new-backgrounds/1188576/18857671x1.webp)
Straight cable for use with MDI-II to MDI-X connections
With a crossover cable, two pairs of wires are switched at one connector end. Carry out the following steps to create a customized, crossover
1.Leave one end of the cable as is, with the
2.At the other end of the cable, connect wires 1 and 2 to contacts 3 and 6, respectively. Likewise, connect wires 3 and 6 to contacts 1 and 2. Refer to the following diagram:
Crossover cable for use with
26