D-Link DE-81 6TP, DE81 2TP+, DE-824TP manual LED Indicators, Jabber LED, Collision LED

Page 12
LED Indicators

receptacle on the rear panel of the Ethernet Hub. Plug the other end of the power cord into an electric service outlet. Turn on power to the Ethernet Hub by switching its rear-panel power switch to the on position.

LED Indicators

LED indicators are located on the front panel of the Ethernet Hub.

Jabber LED

One Jabber LED for all ports. This LED flashes red when the Ethernet Hub detects a data packet that is defective (exceeds allow- able length). This kind of error will ordinarily be managed by the offending Ethernet adapter itself, in which case the Jabber LED will re- turn to its normal off (dark) state.

Collision LED

One Collision LED for all ports. A collision occurs when two stations within a collision domain attempt to transmit at the same time. Intermittent flashing yellow of the Collision LED is normal; the contending adapters resolve each collision by means of a wait-

then-retransmit algorithm. Fre-quency of collisions is an indicator of heavy traffic on the network.

1 0

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page of Contents InstallingConnecting AboutAbout this Guide Rack Mounting Installing Network Cables Hub-to-hub connection between Model DE 812TP+ Ethernet Hubs requires a 1OBaseTcrossover cable. In making a hub-to-hub w UTP ’cableInternal Crossover Features + Model DE-816TPEthernet Rules for Using the Uplink Feature + Model DE-824TP Ethernet Hubtwo connectors would cancel one another, and the hub-to-hub connection would fail Thin coax Segment v T o next nodeConnecting Power AUI port AU1 c a b l e TransceiverLED Indicators Jabber LEDCollision LED Specifications mm including mounting Type 1 US or Type 2 Europe per25OV, 1OA 25OV, 10A 1830mm 6ft DE-812TP+D-Link Office Le FlorilegeTel . 46 - 08 - 70062
Top Page Image Contents