10/100 NWay Ethernet/Fast Ethernet Switch User’s Guide
LED Indicators
After the switch is turned on, the LED indicators should respond as follows:
♦All of the LED indicators will blink momentarily. This blinking of the LED indicators represents a reset of the system.
♦The power LED indicator will remain ON.
Power Failure
As a precaution, the Switch should be turned OFF in case of a power failure. Press the power switch to the off or “0” position. When power is resumed, turn the Switch ON. At all times, avoid leaving the Switch ON if a power failure is anticipated.
Unpacking and Setup | 7 |