Altinex MX2406RM Precautions / Safety Warnings, General, Installation, Cleaning, FCC / CE Notice

Page 3

SWITCHERS

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your MX4206RM Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2406RM and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

•Unauthorized personnel shall not open the unit since there are high-voltage components inside.

•Qualified ALTINEX service personnel, or their authorized representatives must perform all service.

1.2SAFETY GUIDELINES FOR THE RACK- MOUNTING OF THE MX2416RM

•Maximum operating ambient temperature is 35 (degrees C).

•Never restrict the airflow through the device’s fan or vents.

•When installing equipment into a rack, distribute the units evenly. Otherwise, hazardous conditions may be created by an uneven weight distribution.

•Connect the unit to a properly rated supply circuit.

•Reliable Earthing (Grounding) of Rack-Mounted Equipment should be maintained.

1.3 INSTALLATION

•For best results, place the MX2406RM Switcher on a flat, level surface in a dry area away from dust and moisture.

•To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the MX2406RM Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke or steam can harm internal components.

•Handle the MX2406RM Switcher carefully. Dropping or jarring can damage internal components.

•Do not place heavy objects on top of the MX2406RM. If the MX2406RM is to a table or wall, use only an ALTINEX made mounting

accessories like rack mount shelf DA1298RM or rack mount ears DA1299RM and cables for optimum setup.

•To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

•Do not pull the power cord or any cable that is attached to the MX2406RM Switcher.

•If the MX2406RM Switcher is not to be used for an extended period of time, disconnect the power cord from the power outlet.

1.4 CLEANING

•Unplug the MX2406RM power cord before cleaning. Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC / CE NOTICE

•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesired operation.

•This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MX2406RM Table of Contents General Precautions / Safety WarningsInstallation CleaningTechnical Specifications About Your SwitcherDescription of MX2406RM Select Input Auto Switch Mode ButtonReset Button Power UP Default SETAnalog Output Application DiagramPower Supply BI-DIRECTIONAL SwitchingInstalling Your Switcher OperationCONGRATULATIONS! YOU are Done Stand by RS-232 ProtocolRset VernMX2406RM 9-pin D MASTER-SLAVE ConfigurationMaster-Slave Analog Switch Voltage Connection Contact Closure ONE Wire Analog ControlMX2406RM Loop Loop Control with RS-232 CommandNone Manual Loop ControlHigh Resolution VGA Cable AccessoriesMX2406RM Frequently Asked QuestionsTroubleshooting Guide ResetToll Free 1-800-ALTINEX Limited WarrantyAltinex Policy Return Policy

MX2406RM specifications

The Altinex MX2406RM is a sophisticated AV switching and distribution solution designed to meet the demands of modern presentation environments. Known for its versatility and reliable performance, the MX2406RM excels in a variety of settings, including conference rooms, classrooms, and auditoriums.

At the core of the MX2406RM's appeal is its advanced switching technology. This unit supports multiple input and output configurations, allowing users to connect various audio-visual sources easily. The MX2406RM features multiple HDMI and VGA inputs, providing ample options for connecting laptops, projectors, and other AV devices. Additionally, it includes audio inputs and outputs, facilitating seamless integration of sound systems for an enhanced multimedia experience.

One of the standout features of the MX2406RM is its robust scaling capabilities. The built-in scaler ensures that video sources are displayed at optimal resolutions, enhancing image quality and providing a consistent viewing experience across different devices. This is particularly useful in environments where multiple sources with varying resolutions are used, ensuring that all content is presented clearly and professionally.

The MX2406RM also prioritizes ease of use, thanks to its intuitive control interface. The unit can be managed through various methods, including RS-232, TCP/IP, and even via simple button controls. This makes it user-friendly for both technical and non-technical users alike, simplifying the process of switching between different sources during presentations or meetings.

Another key characteristic is its compact and robust design. The MX2406RM is built for durability, making it suitable for both permanent installations and portable applications. Its rack-mountable form factor allows for easy integration into existing AV setups.

Furthermore, it supports advanced audio extraction capabilities, allowing users to separate audio signals from video for independent management. This feature is particularly valuable in professional settings where high-quality sound is essential.

In conclusion, the Altinex MX2406RM stands out as a versatile and reliable AV switcher, combining advanced technology with user-friendly features. Its robust connectivity options, scaling capabilities, and intuitive control make it an ideal choice for a variety of AV applications, ensuring that users can present their content effectively and elegantly. Whether in education or corporate environments, the MX2406RM delivers exceptional performance tailored to meet the needs of today’s dynamic multimedia presentations.
Top Page Image Contents