Altinex MX2406RM manual Installing Your Switcher, Operation, CONGRATULATIONS! YOU are Done

Page 8

SWITCHERS

INSTALLING YOUR SWITCHER

6

Step 1. Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty.

Step 2. Connect the power cord to the unit and plug it into the power outlet.

Step 3. Connect the cables from the video sources (computers) to the input channels and connect the output channel to the display device (i.e. monitor or projector)

Step 4. If a control system is used to control the unit connect RS-232 port to the control system’s RS-232 card. An improper hook up may result in RS-232 interface damage.

Step 5. Verify that the picture quality on the display is good. If you are not receiving a signal, make sure that the display is compatible with the resolution of the computer graphics card.

Contact Closure control requires the use of part # RC5204CC Cable.

CONGRATULATIONS! YOU ARE DONE.

If you experience any problems, please call 1-800-258-4623 or 1-714-990-2300 for international calls.

OPERATION

7

7.1 RS-232 CONTROL

The MX2406RM Switcher uses a female 9-pin HD connector on its rear panel that allows access to a variety of control capabilities.

PIN No.

PIN Designation

1

No connection

2

RS-232 Transmit

3

RS-232 Receive

4

No connection

5

Ground

6

Multiple Switcher Loop

 

Control

7

Analog Switch Voltage

 

Input

8

+5 V (150 mA max)

9

Analog Voltage Output

9-pin D connector

It is generally recommended to select a single method of control for each application, as the activation of several different controls simultaneously may cause unpredictable results.

The majority of control systems and computers used in presentation system applications use the RS-232 communications standard.

To connect the MX2406RM Switcher to a control system or computer for RS-232 Control, only three pins are required on each port: Transmit (TX), Receive (RX), and Ground (GND). The Transmit pin from the control system or computer must be connected to the Receive pin of the switcher control port; do not connect Transmit to Transmit or Receive to Receive.

The following are typical cable wiring pin outs:

IBM PIN No.

MX2406RM PIN No.

3

2

2

3

7

5

Connection IBM-PC 25-pin D to MX2406RM 9-pin D Note: 5, 6, 20 shorted together in IBM side only.

7

Image 8
Contents MX2406RM Table of Contents Precautions / Safety Warnings InstallationCleaning GeneralAbout Your Switcher Technical SpecificationsDescription of MX2406RM Auto Switch Mode Button Reset ButtonPower UP Default SET Select InputApplication Diagram Power SupplyBI-DIRECTIONAL Switching Analog OutputCONGRATULATIONS! YOU are Done Installing Your SwitcherOperation RS-232 Protocol RsetVern Stand byMASTER-SLAVE Configuration Master-Slave Analog Switch Voltage ConnectionContact Closure ONE Wire Analog Control MX2406RM 9-pin DLoop Control with RS-232 Command NoneManual Loop Control MX2406RM LoopAccessories High Resolution VGA CableFrequently Asked Questions Troubleshooting GuideReset MX2406RMLimited Warranty Altinex PolicyReturn Policy Toll Free 1-800-ALTINEX

MX2406RM specifications

The Altinex MX2406RM is a sophisticated AV switching and distribution solution designed to meet the demands of modern presentation environments. Known for its versatility and reliable performance, the MX2406RM excels in a variety of settings, including conference rooms, classrooms, and auditoriums.

At the core of the MX2406RM's appeal is its advanced switching technology. This unit supports multiple input and output configurations, allowing users to connect various audio-visual sources easily. The MX2406RM features multiple HDMI and VGA inputs, providing ample options for connecting laptops, projectors, and other AV devices. Additionally, it includes audio inputs and outputs, facilitating seamless integration of sound systems for an enhanced multimedia experience.

One of the standout features of the MX2406RM is its robust scaling capabilities. The built-in scaler ensures that video sources are displayed at optimal resolutions, enhancing image quality and providing a consistent viewing experience across different devices. This is particularly useful in environments where multiple sources with varying resolutions are used, ensuring that all content is presented clearly and professionally.

The MX2406RM also prioritizes ease of use, thanks to its intuitive control interface. The unit can be managed through various methods, including RS-232, TCP/IP, and even via simple button controls. This makes it user-friendly for both technical and non-technical users alike, simplifying the process of switching between different sources during presentations or meetings.

Another key characteristic is its compact and robust design. The MX2406RM is built for durability, making it suitable for both permanent installations and portable applications. Its rack-mountable form factor allows for easy integration into existing AV setups.

Furthermore, it supports advanced audio extraction capabilities, allowing users to separate audio signals from video for independent management. This feature is particularly valuable in professional settings where high-quality sound is essential.

In conclusion, the Altinex MX2406RM stands out as a versatile and reliable AV switcher, combining advanced technology with user-friendly features. Its robust connectivity options, scaling capabilities, and intuitive control make it an ideal choice for a variety of AV applications, ensuring that users can present their content effectively and elegantly. Whether in education or corporate environments, the MX2406RM delivers exceptional performance tailored to meet the needs of today’s dynamic multimedia presentations.