Troubleshooting Guide

SWITCHERS

respond? How do I control several switchers with one RS-232 card in a control system?

Can I use contact closure to control the switcher?

Can this switcher be used outside of the United States?

You can control multiple switchers with one card at this time. The unit does have ID codes and can be differentiated by the control system. Call Altinex if this requirement is important for your system.

A special cable that plugs into the RS-232 port and converts contact closure into analog control is available. This is RC5204CC cable is made by Altinex on request.

Yes, the MX2206RM uses a universal internal power supply, enabling it to be used throughout the world. Please make sure to have the voltage setting in the correct position and please make sure to use the proper adapter cable for the country it will be used. Adapter cables for several countries are available through Altinex.

∙Please make sure, that input signal formats are same for input (source) and output (display).

∙Please make sure that input signal amplitude level is as follows:

1.RED, GREEN, & BLUE are less than 10 V.

2.SYNC is less than 1.0 V and more than 0.3 V.

∙Please use the appropriate input voltage

110VAC or 220 VAC.

∙Please make sure that the proper quality of cables is used. We recommended Altinex made cables for the best results.

∙If the problem shows up after continuous usage at higher voltage, higher temperature, higher humidity or at other extreme environmental conditions, please correct that.

∙Please reset the unit by pressing the RESET key for more than 2 seconds, if problem exists with the switcher.

∙Make sure that all channels (inputs) are not OFF (i.e. RED LED is not ON next to STAND BY key).

∙If you are using any control software or hardware to control MX2206RM, then first verify operation of the unit using MX Control software available from Altinex web-site: www.altinex.com. Make sure that cable is made according to manual, where RX pin of the MX2206RM is connected to TX pin of the computer.

∙If you are controlling the unit by RS-232 command, make sure there is minimum delay of 100 milliseconds before sending the next command.

∙If you have multiple MX2206RM units connected in Master-Slave mode or Loop- Control mode, please make sure to have connection of RS-232 port done according to manual.

MX2206RM specifications

The Altinex MX2206RM is a sophisticated and innovative product designed to enhance the efficiency of AV systems, making it an essential tool for a variety of applications, ranging from corporate presentations to educational settings. This advanced multimedia interface serves as a reliable solution for managing multiple inputs and outputs, significantly simplifying the process of connecting devices to a centralized system.

One of the key features of the MX2206RM is its robust support for a wide array of video and audio formats. This versatility allows users to seamlessly integrate diverse devices, including laptops, projectors, and display screens, without compatibility concerns. The MX2206RM supports HDMI, VGA, and audio connections, among others, ensuring that users can connect virtually any device with ease.

The product is equipped with a microprocessor-controlled design, enhancing its operational efficiency. This allows for intelligent switching between the various input sources, ensuring that the desired video or audio content is displayed without delay. The intelligent switching technology minimizes interruptions, making it ideal for live presentations and events where time is crucial.

The MX2206RM also features built-in equalization and signal amplification, which enhances the quality of the transmitted audio and video signals. These technologies are particularly beneficial in larger installations, where signal degradation can compromise performance. By ensuring that signals reach their destination without loss of quality, the MX2206RM maintains high standards for audiovisual output.

In terms of usability, the MX2206RM boasts a user-friendly interface that allows for quick and easy operation. The intuitive design makes it accessible for users of all levels of technical expertise. Additionally, the product can be controlled remotely, further enhancing its flexibility and convenience.

Another significant characteristic of the MX2206RM is its compact and rack-mountable design, which saves space while providing a professional appearance for installations. This design is particularly useful in conference rooms or educational environments where aesthetics are as important as functionality.

In conclusion, the Altinex MX2206RM is a powerful multimedia interface that combines versatility, intelligence, and user-friendly operation. Its advanced features and reliable performance make it an invaluable component for modern AV systems, catering to a wide range of professional and educational needs.