Altinex MX2206RM manual Stand by Reset, RS-232 Protocol, Rset, Vern

Page 9

SWITCHERS

IBM PIN No.

MX2206RM PIN No.

2

2

3

3

5

5

Connection of IBM-PC 9-pin D to MX2206RM 9-pin D. Note: 4, 6, 8 shorted together in IBM side only.

The MX2206RM Switcher is also designed to send feedback commands from the switcher to the control system when the buttons on the front panel of the switcher are pressed.

The Feedback codes are as follows:

Port setting preferences for the control system or computer being used to control the switcher should be set as follows:

BAUD RATE (Bits per second)

2400

Data bits

8

Parity

None

Stop Bits

1

There is no software or hardware flow control implemented. The RS-232 input has a 6 character

Key

pressed

1

2

3

4

5

6

STAND BY

RESET

Description

Input Select

Input Select

Input Select

Input Select

Input Select

Input Select

All Outputs OFF

Reset

Feedback

Code

[INP1]

[INP2]

[INP3]

[INP4]

[INP5]

[INP6]

[INP0]

[RSET][INPx]

buffer and will not execute additional commands until the previous command is fully processed.

7.2 RS-232 PROTOCOL

[INP0]

All channels OFF

[INP1]

Select Input 1

[INP2]

Select Input 2

[INP3]

Select Input 3

[INP4]

Select Input 4

[INP5]

Select Input 5

[INP6]

Select Input 6

[RSET]

Reset unit to user defaults

[VERN]

Returns firmware version

 

numbers

Commands must be issued as shown, in ALL CAPS and with the brackets [ ] included in the command string. After processing a valid command, an [OK] string will be returned. A command echo will also follow the [OK] string.

For instance, a command of [INP1] would return [OK][INP1]. The [VERN] command will return the corresponding software version being used by the switcher, such as an error string, [ERR] will be returned.

If the control system being used is not setup to wait for the [OK] string, it is important to include a 100 milliseconds delay between each command.

The following commands are added to the standard set of commands in order to facilitate control of multiple units using a single RS-232 control port. These commands are available on the switcher that has firmware revision number: 2.0. Use [VERN] commands to determine the firmware revision. These commands add additional flexibility to the switcher.

[InnOmm]

nn -

Input Number 00 to 99

mm- Output Number 01-99

This command connects any input to any output. The switching occurs as soon as the command is completed. The input 00 is used to disconnect a particular output from any input. For example, command [I00O01] will disconnect output 1 from any input.

[OUTmm]

This command sets the switcher to respond to a specific output only. The default setting is output 1.

[SETxnnmm]

 

x -

select input number

nn -

Minimum input number

mm- Maximum input number

8

Image 9
Contents MX2206RM Introduction Table of ContentsPrecautions / Safety Warnings Technical Specifications About Your SwitcherDescription of MX2206RM Sync Delay SET Sync DelayAuto Switch Mode Button Reset ButtonPower Supply Application DiagramOperation Installing Your SwitcherPIN CONGRATULATIONS! YOU are DoneRS-232 Protocol Stand by ResetRset VernMASTER-SLAVE Configuration Contact Closure ONE Wire Analog ControlNone Loop Control with RS-232 Command Manual Loop ControlMX2206RM Loop Accessories Frequently Asked QuestionsF4 Beep ON/OFFTroubleshooting Guide Altinex Policy Limited WarrantyReturn Policy Contact Information

MX2206RM specifications

The Altinex MX2206RM is a sophisticated and innovative product designed to enhance the efficiency of AV systems, making it an essential tool for a variety of applications, ranging from corporate presentations to educational settings. This advanced multimedia interface serves as a reliable solution for managing multiple inputs and outputs, significantly simplifying the process of connecting devices to a centralized system.

One of the key features of the MX2206RM is its robust support for a wide array of video and audio formats. This versatility allows users to seamlessly integrate diverse devices, including laptops, projectors, and display screens, without compatibility concerns. The MX2206RM supports HDMI, VGA, and audio connections, among others, ensuring that users can connect virtually any device with ease.

The product is equipped with a microprocessor-controlled design, enhancing its operational efficiency. This allows for intelligent switching between the various input sources, ensuring that the desired video or audio content is displayed without delay. The intelligent switching technology minimizes interruptions, making it ideal for live presentations and events where time is crucial.

The MX2206RM also features built-in equalization and signal amplification, which enhances the quality of the transmitted audio and video signals. These technologies are particularly beneficial in larger installations, where signal degradation can compromise performance. By ensuring that signals reach their destination without loss of quality, the MX2206RM maintains high standards for audiovisual output.

In terms of usability, the MX2206RM boasts a user-friendly interface that allows for quick and easy operation. The intuitive design makes it accessible for users of all levels of technical expertise. Additionally, the product can be controlled remotely, further enhancing its flexibility and convenience.

Another significant characteristic of the MX2206RM is its compact and rack-mountable design, which saves space while providing a professional appearance for installations. This design is particularly useful in conference rooms or educational environments where aesthetics are as important as functionality.

In conclusion, the Altinex MX2206RM is a powerful multimedia interface that combines versatility, intelligence, and user-friendly operation. Its advanced features and reliable performance make it an invaluable component for modern AV systems, catering to a wide range of professional and educational needs.