Altinex MX2206RM manual Installing Your Switcher, Operation, Pin, CONGRATULATIONS! YOU are Done

Page 8

SWITCHERS

INSTALLING YOUR SWITCHER

6

Step 1. Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty.

Step 2. Connect the power cord to the unit and plug it into the power outlet.

OPERATION

7

7.1 RS-232 CONTROL

The MX2206RM Switcher uses a female 9-pin HD connector on its rear panel that allows access to a variety of control capabilities.

Step 3. Connect the cables from the video sources (computers) to the input channels and connect the output channel to the display device (i.e. monitor or projector)

Step 4. If control system is used to control the unit, connect RS-232 port to the control system RS-232 card. An improper hook up may result in RS-232 interface damage.

Step 5. Verify that picture quality on the display is good. If you are not receiving a signal, make sure that the display is compatible with the resolution of the computer graphics card.

PIN

No.

1

2

3

4

5

6

7

8

9

9-pin D connector

PIN Designation

No connection

RS-232 Transmit

RS-232 Receive

No connection

Ground

Multiple Switcher Loop Control

Analog Switch Voltage Input

+5 V (150 mA max)

Analog Voltage Output

Contact Closure control requires the use of part

#RC5204CC Cable.

CONGRATULATIONS! YOU ARE DONE.

If you experience any problems, please call

1-800-258-4623 or 1-714-990-2300 for

international calls.

It is generally recommended to select a single method of control for each application, as the activation of several different controls simultaneously may cause unpredictable results.

The majority of control systems and computers used in presentation system applications use the RS-232 communications standard.

To connect the MX2206RM Switcher to a control system or computer for RS-232 control, only three pins are required on each port: Transmit (TX), Receive (RX), and Ground (GND). The Transmit pin from the control system or computer must be connected to the Receive pin of the switcher control port; do not connect Transmit to Transmit or Receive to Receive.

The following are typical cable wiring pin outs:

IBM PIN No.

MX2206RM PIN No.

3

2

2

3

7

5

Connection of IBM-PC 25-pin D to MX2206RM 9-pin

D.Note: 5, 6, 20 shorted together in IBM side only.

7

Image 8
Contents MX2206RM Table of Contents IntroductionPrecautions / Safety Warnings About Your Switcher Technical SpecificationsDescription of MX2206RM Sync Delay Sync Delay SETAuto Switch Mode Button Reset ButtonApplication Diagram Power SupplyInstalling Your Switcher OperationPIN CONGRATULATIONS! YOU are DoneStand by Reset RS-232 ProtocolRset VernNone MASTER-SLAVE ConfigurationContact Closure ONE Wire Analog Control MX2206RM Loop Loop Control with RS-232 CommandManual Loop Control Frequently Asked Questions AccessoriesF4 Beep ON/OFFTroubleshooting Guide Limited Warranty Altinex PolicyReturn Policy Contact Information

MX2206RM specifications

The Altinex MX2206RM is a sophisticated and innovative product designed to enhance the efficiency of AV systems, making it an essential tool for a variety of applications, ranging from corporate presentations to educational settings. This advanced multimedia interface serves as a reliable solution for managing multiple inputs and outputs, significantly simplifying the process of connecting devices to a centralized system.

One of the key features of the MX2206RM is its robust support for a wide array of video and audio formats. This versatility allows users to seamlessly integrate diverse devices, including laptops, projectors, and display screens, without compatibility concerns. The MX2206RM supports HDMI, VGA, and audio connections, among others, ensuring that users can connect virtually any device with ease.

The product is equipped with a microprocessor-controlled design, enhancing its operational efficiency. This allows for intelligent switching between the various input sources, ensuring that the desired video or audio content is displayed without delay. The intelligent switching technology minimizes interruptions, making it ideal for live presentations and events where time is crucial.

The MX2206RM also features built-in equalization and signal amplification, which enhances the quality of the transmitted audio and video signals. These technologies are particularly beneficial in larger installations, where signal degradation can compromise performance. By ensuring that signals reach their destination without loss of quality, the MX2206RM maintains high standards for audiovisual output.

In terms of usability, the MX2206RM boasts a user-friendly interface that allows for quick and easy operation. The intuitive design makes it accessible for users of all levels of technical expertise. Additionally, the product can be controlled remotely, further enhancing its flexibility and convenience.

Another significant characteristic of the MX2206RM is its compact and rack-mountable design, which saves space while providing a professional appearance for installations. This design is particularly useful in conference rooms or educational environments where aesthetics are as important as functionality.

In conclusion, the Altinex MX2206RM is a powerful multimedia interface that combines versatility, intelligence, and user-friendly operation. Its advanced features and reliable performance make it an invaluable component for modern AV systems, catering to a wide range of professional and educational needs.