On 1-SVID 3-CVID, Single Card, Group of Cards

MULTI-TASKER

the command [VERC2U3]. The Multi-Tasker™ will return the following feedback:

MT104-107 690-0160-002

MT104-107	= card type
690-0160-002	= software version

2.[C]

This command receives the status of the card.

Command Format: [CnUi]

Cn = card ID (n = 1 to max slots) Ui = unit id (i = from 0 to 9)

Example:

There is an MT104-107card is in slot #2 of unit 3. S-Video Input 1 is ON and C-Video Input 3 is ON. To get the status of the card, send the command [C2U3]. The feedback will be as follows:

ON: 1-SVID 3-CVID

1-SVID	= S-Video Input 1 ON
3-CVID	= Composite Video Input 3 ON

If there is no card in slot #2 of unit 3, sending the [C2U3] command will not return any feedback.

3. [CnS]

This command saves the current status of the card's input to output configuration. This configuration will be restored after the system is Reset or powered OFF then ON.

Cn = card number

S = save configuration

If S-Video Outputs 1,2,3 and Video Outputs 1,2,3 are enabled, the feedback after sending the command [C4S], for slot 4, would be:

SVID: 1,2,3 CVID: 1,2,3 C04 Saved

4. [ON]

This command enables one input of a single card or a group of cards.

SINGLE CARD

[ONmVCnUiS] for Composite Video

[ONmSCnUiS] for S-Video

This command enables input “m” and disables all other inputs.

[ONmVCnUi]: Enables one composite video input (C-Video)

[ONmSCnUi]: Enables one S-Video input

Default when plugged in:

S-Video Input #1 = ON

C-Video Input #1 = ON

m= Input number (m = 1 to 4) (input 4 is internal)

Cn	=	Card ID (n = # from 1 to max slots)
Ui	=	Unit ID number (i = 0 to 9)

S= activates S-Video input V = activates C-Video input

S = saves command to memory

Example:

All of the inputs on the MT104-107card are OFF and the card is in slot #5 of unit 3:

1)[ON1VC5U3]: Turns ON C-Video input 1.

2)[ON3VC5U3]: Turns ON C-Video input 3

Since only one of each input type may be selected at a time, Input 1 is now OFF. It was turned OFF automatically when Input 3 was turned ON.

3)[ON2SC5U3]: Turns ON S-Video input 2.

GROUP OF CARDS

[ONmVGkUiS] for Composite Video

[ONmSGkUiS] for S-Video

This command enables input "m" for each card in group "k" of unit "i".

[ONmVGkUi]: Enables a group of composite video inputs (C-Video)

[ONmSGkUi]: Enables a group of S -Video inputs

m	=	Input number (m = 1 to 4)
(input 4 is internal)
Gk	=	group number (k = # from 1-9)
Ui	=	unit number (i = # from 0-9)
S	=	activates S-Video input
V	=	activates C-Video input