Allied Telesis AT-8000S manual Viewing Integrated Cable Tests

Page 146

Managing System Files

Viewing Integrated Cable Tests

Viewing Integrated Cable Tests

The Cable Test Page contains fields for performing tests on copper cables. Cable testing provides diagnostic information about where errors occurred in the cable, the last time a cable test was performed, and the type of cable error that occurred. The tests use Time Domain Reflectometry (TDR) technology to test the quality and characteristics of a copper cable attached to a port. Cables up to 120 meters long can be tested. Cables are tested when the ports are in the down state, with the exception of the Approximated Cable Length test.

To perform a copper cable test:

1.Click Utilities > Cable Test. The Cable Test Page opens:

Figure 93: Cable Test Page

The Cable Test Page displays the following information:

•Unit Number — Indicates the stacking member for which the Ethernet ports information is displayed.

•Port — Specifies the port to which the cable is connected.

•Test Result — Displays the cable test results. Possible values are:

–No Cable — Indicates that a cable is not connected to the port.

–Open Cable — Indicates that a cable is connected on only one side.

–Short Cable — Indicates that a short has occurred in the cable.

–OK — Indicates that the cable passed the test.

•Cable Fault Distance — Indicates the distance from the port where the cable error occurred.

•Last Update — Indicates the last time the port was tested.

Page 145

Page 145 Page 147
Image 146
Page 145 Page 147
Contents Layer Ethernet Switch AT-8000S SeriesTable of Contents Configuring Ports Configuring Power Over Ethernet 126 176 Table of Contents Preface Web Browser Interface User’s GuideWeb Browser Interface User’s Guide Overview Web Browser Interface User’s Guide OverviewIntended Audience Online Support Document ConventionsContacting Allied Telesis Contacting Allied Telesis Starting the Application Click Login. The Embedded Web System Home Page opensGetting Started Click Configuration. The System General Page opens Starting the ApplicationViewing the Device Representation Using the Web Browser InterfaceClick Layer 1 Port Settings. The Port Settings Page opens Interface Components Using the Web Browser InterfaceUser Interface Components Component DescriptionButton Button Name Description Using the Management ButtonsConfiguration Management Buttons Adding, Modifying and Deleting Information Add Local UserSaving Configurations Logging OutResetting the Device Resetting the DeviceDefining System Information Click System General. The System General Page opensDefining System Information Configuring System Time Configuring System Time Setting the System Clock Click System System Time. The System Time Page opensPolling for Unicast Time Information Configuring SntpConfiguring Sntp Polling for Anycast Time InformationConfiguring Daylight Saving Time Define the Server IP Address and the Poll Interval fieldsConfiguring Daylight Saving Time Configuring Device Security Configuring Management Security Configuring Management SecurityDefining Access Profiles HttpAdd Access Profile Click Add. The Add Access Profile Page opensAllied Telesis AT-8000S Switch Defining Profile Rules Profile RulesAdd Profile Rule Click Add. The Add Profile Rule Page opensProfiles Rules Configuration Click Modify. The Profiles Rules Configuration Page opensDefining Authentication Profiles Authentication ProfilesClick Add. The Add Authentication Profile Page opens Add Authentication Profile Enter the Profile NameMapping Authentication Profiles Authentication MappingDefine the Console, Telnet, and Secure Telnet SSH fields Configuring Server Based AuthenticationConfiguring TACACS+ TACACS+ Configuration Add TACACS+ Configuring Radius Radius ConfigurationAdd Radius Configuring Local Users Click Mgmt. Security Local Users. The Local Users Page opensClick Modify. The Local User Configuration Page opens Click Create. The Add Local User Page opensConfiguring Network Security Configuring Network SecurityNetwork Security Overview Managing Port SecurityClick Modify. The Port Security Configuration Page opens Port SecurityPort Security Configuration Defining 802.1x Port Access 802.1x Port AccessClick Settings. The Port Authentication Settings Page opens Click Enable Port AccessSelect the Authentication Method Configuring Device Security Click Modify. The Storm Control Configuration Page opens Enabling Storm ControlStorm Control Configuration Configuring Ports Click Modify. The Modify Port Settings Page opens Defining Port SettingsDefining Port Settings Modify Port Settings Configuring Ports Allied Telesis AT-8000S Switch Click Layer 1 Port Mirroring. The Port Mirroring Page opens Configuring Port MirroringConfiguring Port Mirroring Click Enable Mirror Click Modify. The Modify Mirror Page opensTo modify or delete a port mirror Aggregating Ports Aggregating Ports Defining Trunk SettingsClick Layer 1 Port Trunking. The Trunk Settings Page opens Trunk Configuration Settings Click Modify. The Trunk Settings Page opensConfiguring Ports Allied Telesis AT-8000S Switch Defining Port Trunking Port TrunkingModify Trunk Configuring Lacp Click Modify. the Modify Lacp Settings Page opensConfiguring Interfaces Click Layer 2 MAC Address. The MAC Address Page opens Defining MAC AddressesDefining MAC Addresses Add MAC Address Click Add. The Add MAC Address Page opensView MAC Address Table Click Close. The View MAC Address Table Page is displayedConfiguring VLANs Configuring VLANs Defining Vlan PropertiesAllied Telesis AT-8000S Switch Defining Vlan Interface Settings Click Layer 2 Vlan Interface. The Vlan Interface Page opensModify Interface Configuration Click Modify. The Modify Interface Configuration Page opensConfiguring Gvrp Defining GvrpSelect Enable Gvrp Click Modify. The Gvrp Port Configuration Page opensEnabling/Disabling Gvrp on a Port Define the Gvrp State and Gvrp Registration fieldsConfiguring System Logs System Log Severity Levels Description Message Defining Log SettingsDefining Log Settings Event Log Clearing Event Logs Configuring Log ServersClearing Event Logs Click Create. The Add Syslog Server Page opensSetting System Log Display Click Modify. The Modify Event Log Output Page opensViewing Flash Logs Viewing Flash LogsConfiguring Spanning Tree Defining STP Properties Configuring Classic Spanning TreeConfiguring Classic Spanning Tree Complete the Spanning Tree State and Bridge Settings fields Click Layer 2 Spanning Tree. The Spanning Tree Page opens Click Configure. The STP Interface Configuration Page opensDefining STP Interfaces Allied Telesis AT-8000S Switch STP Modify Interface Configuration Configuring Rapid Spanning Tree RstpConfiguring Rapid Spanning Tree Modify RstpConfiguring Multiple Spanning Tree Define the Region Name, Revision, and Max Hops fields Configuring Multiple Spanning TreeDefining Mstp Properties Mstp Interface Settings Defining Mstp InterfacesConfiguring Spanning Tree Mstp Instance Settings Defining Mstp InstancesConfiguring Spanning Tree Configuring Multicast Forwarding Configuring Igmp Snooping Configuring Igmp SnoopingIgmp Snooping Settings Click Modify. The Igmp Snooping Settings Page opensDefining Multicast Bridging Groups Defining Multicast Bridging GroupsClick Modify. The Modify Multicast Group Page opens Check the Enable Bridge Multicast Filtering checkboxClick Create. The Add Multicast Group Page opens Defining Multicast Forward All Settings Defining Multicast Forward All SettingsModify Multicast Forward All Click Modify. The Modify Multicast Forward All Page opensConfiguring Multicast Forwarding Configuring Snmp Snmp Overview Snmp OverviewEnabling Snmp Snmp GlobalEnabling Snmp Defining Snmp Communities Snmp Communities Basic TableClick Modify. The Snmp Community Settings Page opens Defining Snmp CommunitiesDefining Snmp Groups Snmp GroupClick Modify. The Modify Snmp Group Profile Page opens Defining Snmp GroupsClick Create. The Create Snmp Group Profile Page opens Defining Snmp Users Snmp UsersClick Modify. The Snmp User Settings Page opens Defining Snmp UsersDefining Snmp Views Click Create. The Add Snmp VIew Page opensAdd Snmp VIew Defining Snmp ViewsConfiguring Snmp Notifications Defining Notification RecipientsConfiguring Snmp Notifications SNMPv1,2c Notification RecipientDefining Notification Filters Create Snmp Notification RecipientSnmp Notification Filter Settings Configuring Power Over Ethernet Enabling PoE and Setting the Power Threshold Enabling PoE and Setting the Power ThresholdDefining PoE Settings Defining PoE Settings Modify PoEModify the Admin Mode and Priority Level fields Configuring Power Over Ethernet Configuring Services Enabling Class of Service CoS Enabling Class of Service CoSCoS Configuration Click Modify. The CoS Configuration Page opensConfiguring CoS Priorities Configuring CoS PrioritiesClick Configure. The Configure CoS Page opens Select the Configure CoS Priority to Egress Queues valuesClick Configure CoS Mapping QueuesClick Configure. The Configure Dscp Page opens Select the Configure Dscp Priority valuesClick Configure Dscp Mapping Dscp Values to QueuesConfiguring Bandwidth QoS Click Services Bandwidth. The Bandwidth Page opensConfiguring Bandwidth QoS Click Modify. The Bandwidth Configuration Page opensManaging System Files Click Apply in the Reset to Factory Defaults section Restoring the Default ConfigurationRestoring the Default Configuration Check the Reboot Switch After Resetting to Defaults optionDefining Tftp File Uploads and Downloads Click Utilities File System The File System Page opensDefining Tftp File Uploads and Downloads Select the Source and the Destination Unit Click Utilities Cable Test. The Cable Test Page opens Viewing Integrated Cable TestsViewing Integrated Cable Tests Copper Cables Extended Feature Viewing Optical Transceivers Viewing Optical TransceiversReset Select the Reset Unit NoResetting the Device Viewing Statistics Viewing Interface Statistics Viewing Interface StatisticsViewing Interface Statistics Receive Statistics Viewing Etherlike Statistics Etherlike StatisticsOpen the Etherlike Statistics Managing Rmon Statistics Managing Rmon StatisticsViewing Rmon Statistics Allied Telesis AT-8000S Switch Click Rmon History. The Create History Entry Page opens Configuring Rmon HistoryClick Statistics Rmon History. The Rmon History Page opens Click Modify. The History Control Settings Page opens Create History EntryViewing the Rmon History Table Click View. The Rmon History Table Page opensAllied Telesis AT-8000S Switch Configuring Rmon Events Click Statistics Rmon Events. The Rmon Events Page opensDefine the Community, Description, Type and Owner fields Click Modify. The Event Control Settings Page opensClick Create. The Create Event Entry Page opens Viewing the Rmon Events Logs Click View. The Rmon Events Logs Page opensDefining Rmon Alarms Rmon AlarmAdd Alarm Rmon Alarm Settings Click Modify. The Rmon Alarm Settings Page opensViewing Statistics Managing Stacking Stacking Chain Topology Stacking OverviewStacking Ring Topology Stacking OverviewStacking Members and Unit ID Removing and Replacing Stacking MembersExchanging Stacking Members Configuring Stacking Management Enhanced StackingConfiguring Stacking Management Appendix A. Downloading Software with CLI Connecting a TerminalInitial Configuration Static IP Address and Subnet Mask ConfigurationInitial Configuration User Name System software file file1 Boot file fileDownloading Software Standalone Device Software DownloadStacking Member Software Download Downloading SoftwareAllied Telesis AT-8000S Switch Console# copy unit//1/image unit//4/image Appendix B. System Defaults Configuration Defaults RS-232 Port SettingsPort Defaults Security DefaultsAddress Table Defaults System Time DefaultsSpanning Tree Defaults Multicast Defaults Vlan DefaultTrunking Defaults Vlan DefaultSymbols IndexAccess profiles Sntp
Related manuals
Manual 48 pages 34.24 Kb

AT-8000S specifications

The Allied Telesis AT-8000S series switches are a range of advanced Layer 2 Ethernet switches designed for efficient networking in various environments. Engineered with performance, reliability, and cost-effectiveness in mind, these switches are ideal for businesses seeking to enhance their network infrastructure.

One of the main features of the AT-8000S series is its high-speed data forwarding capabilities. With support for 10/100/1000 Mbps Ethernet ports, these switches provide fast and reliable connections, enabling seamless data transfer and enhanced communication between devices. The non-blocking switching architecture ensures that full bandwidth is available at all times, maximizing throughput and reducing latency in network traffic.

The AT-8000S series incorporates advanced Layer 2 switching technologies, such as VLAN support, allowing users to segment network traffic for improved performance and security. Virtual Local Area Networks (VLANs) help isolate sensitive data and reduce unnecessary broadcast traffic, enhancing the overall performance of the network.

Quality of Service (QoS) is another significant feature integrated into these switches, prioritizing different classes of network traffic. This functionality ensures that critical applications receive the necessary bandwidth and minimal latency, which is imperative for voice over IP, video conferencing, and other latency-sensitive applications.

In terms of network management, the AT-8000S series provides a variety of options, including an intuitive web-based interface, SNMP support, and the ability to manage switch configurations through console access. This flexibility allows network administrators to monitor performance and manage configurations easily.

The switches are built for durability, featuring a robust design suitable for deployment in various environments, including temperature-sensitive areas. Power over Ethernet (PoE) capability is also available in certain models, allowing network devices like IP cameras and wireless access points to receive power through the same cable as data, simplifying installation and reducing clutter.

Allied Telesis emphasizes security within the AT-8000S series, with features such as port security, DHCP snooping, and IEEE 802.1X authentication to safeguard against unauthorized access and potential threats.

Overall, the Allied Telesis AT-8000S series provides a comprehensive networking solution tailored for modern business needs, combining performance, flexibility, and security to support a growing array of applications and devices within the network.
Top Page Image Contents