Allied Telesis AT-S95, AT-8000GS manual Reboot the device with the following command

AT-S95 Version 2.0.0.27 Software Release Notes

6.Reboot the device with the following command:

console# reload

This command causes the switch to reboot. By the end of the reboot process, the final code drop will be running.

Note

To upgrade stacked AT-8000GS switches, see the AT-S95 Management Software CLI User’s Guide for instructions.

Upgrading the AT-S95 Bootloader and Software with the Web Browser Interface

To upgrade the AT-S95 bootloader and management software to the latest version with the web browser interface, do the following:

1. From the bookmarks on the left side of the page, select the Utilities tab. See Figure 1.

Figure 1. Utilities Tab

2. Select the File System tab from the top of the page.

PN 613-001778 Rev A 5 Allied Telesis, Inc.