Allied Telesis AT-8000GS, AT-S95 manual History of Resolved Issues, Product Documentation, Version

Page 8
Product Documentation

AT-S95 Version 2.0.0.27 Software Release Notes

17. Click the Reset button.

The switch is rebooted.

Product Documentation

For hardware installation instructions for the AT-8000GS switches, refer to the following manual:

AT-8000GS Series Stackable Gigabit Ethernet Switches Installation Guide For software management instructions, refer to the following manuals:

AT-S95 Management Software CLI User’s Guide

AT-S95 Management Software Web Browser Interface User’s Guide

These documents are available for on the Allied Telesis website at available at www.alliedtelesis.com/support/software/. Once you access the web site, enter the hardware product model in the Search by Product Name field; for example, enter “AT-8000GS/24.” Then click Find. You can view the documents online or download them onto your local workstation or server.

Where to Find Product Information and Management Software Updates

Both the product documentation and the management software updates for all Allied Telesis products are available on our web site at http://www.alliedtelesis.com/support.

Once you access the web site, enter the hardware product model of your switch in the Search by Product Name field, for example, enter “AT-8000GS/24.” Then click Find. You can view the documents online or download them onto your local workstation or server.

The software is available for download at http://www.alliedtelesis.com/ support/software/ restricted/. You must have an account to access this site. If you do not have an account, then click on the “create an account” link.

History of Previous Versions

History of Resolved Issues

Version 2.0.0.26

The MAC authentication option in 802.1x port-based network access control would cause the switch to periodically reboot. (ATI 293)

The 802.1x Guest VLAN feature worked incorrectly. (ATI 295)

Version 2.0.0.25

DNS behavior was inconsistent. (CQ130199 ATI285)

IGMP ACLs were not applied properly. (CQ 123252 ATI256)

Issues Resolved Before Version 2.0.0.25

PN 613-001778 Rev A

8

Allied Telesis, Inc.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Supported Platforms AT-S95 Version AT-8000GS Switch Software Release NotesNew Features Resolved IssuesKnown Issues Operational Notes Security port lock Port security mechanism is not triggered for MAC violation if MAC is learned on another locked port as a secured MAC address Upgrading the AT-S95 Bootloader Code and Software with the CLI Upgrade Procedure6. Reboot the device with the following command The File System tab is displayed. See Figure 2 on page 8. Click OK History of Resolved Issues Where to Find Product Information and Management Software UpdatesProduct Documentation History of Previous VersionsHistory of New Features Table 1 New Command DescriptionCLI Command DescriptionContacting Allied Telesis Contacting Allied Telesis
Top Page Image Contents