Allied Telesis x600-24Ts-POE manual Installing an XFP Transceiver

Installing an XFP Transceiver

x600 Layer 3 Gigabit Ethernet Switch Installation Guide

To install an XFP transceiver in an x600 switch, perform the following procedure:

1.Remove the dust plug from a transceiver slot on the switch. Refer to Figure 43.

L/A	1000	LINK /	PORT	ACTIVITY
D/C
	FDX
			ACT
				10/100	LINK /
				HDX		ACT
	XFP			/	COL
				L/A	XFP		STACK
24									1				SD
							MSTR			3
								L/A			5
						1						7
	25						L/A						9
								D/C						1
						2
							L/A
								L/A
					26		PRES	D/C
									2	4	6
												8
													10
														1
							1336

Figure 43. Removing an XFP Dust Plug

2.Remove the transceiver from its shipping container and store the packaging material in a safe location.

3.Position the transceiver with the label facing down.

4.Slide the transceiver into the slot until it clicks into place.

L/A	1000	LINK /	PORT	ACTIVITY
D/C
	FDX
			ACT
				10/100	LINK /
				HDX		ACT
	XFP			/	COL
				L/A			STACK
24					XFP				1				SD
							MSTR			3
								L/A			5
						1						7
	25						L/A						9
						2		D/C						1
							L/A
								L/A
					26		PRES	D/C
									2	4	6
												8
													10
														1
							1316

Figure 44. Installing an XFP Transceiver

83