Allied Telesis ATFS705EFCSC60 10/100 Mbps Twisted Pair Ports, Type of Connector, Speed, Cabling

Page 13

AT-FS705E FC and AT-FS706E FC Installation Guide

10/100 Mbps Twisted Pair Ports

The AT-FS705E FC and AT-FS706E FC switches have four twisted pair ports.

Type of Connector

The twisted pair ports have RJ45 connectors.

Speed

These ports are compliant with the 10Base-T and 100Base-TX standards and are capable of either 10 Mbps or 100 Mbps operation. The ports are IEEE 802.3u Auto-negotiation-compliant, meaning the speed for each port is set automatically by the switch after determining the speed of the end node connected to the port. Auto-negotiation is designed to ensure that each port on the switch and the end node connected to each port are operating at the same speed and that they are communicating at the highest possible common speed of the devices.

Duplex Mode

The twisted pair ports can operate in either half- or full-duplex operation. Just as with speed, the ports use Auto-negotiation to set the duplex mode. If the end node is capable of full-duplex mode, the port is set to full-duplex. If the end node is capable of only half-duplex, the port is set to half-duplex. For an explanation of duplex mode, refer to the section “Duplex Mode” on page 9.

Cabling

The RJ45 ports on the switch can use shielded or unshielded twisted pair cable. There are several categories of twisted pair cabling used in Ethernet networks. They are Category 3, 4, and 5. The main difference between the categories relates to their attenuation, which is a measurement of signal loss over the length of the cable. All cables experience attenuation. The signal loses strength the longer the cable. The lower the loss of signal, the lower the attenuation.

Of the three categories, Category 3 has the highest attenuation, meaning that it has the highest signal loss. It is adequate for 10 Mbps operation, but should never be used for 100 Mbps network operations. The higher speed requires Category 5. If you are installing a new network with end nodes operating at 10 Mbps, it is recommended that you install Category 5 instead of Category 3. This will save you the trouble of having to install new twisted pair cabling should you later upgrade your end nodes to 100 Mbps.

3

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AT-FS705E FC AT-FS706E FC Page Industry Canada Electrical Safety and Emission Compliance StatementPage Table of Contents Technical Support Fax Order Incident Summary Welcome to Allied Telesyn Where to Find Web-based Guides Document ConventionsOnline Support Telephone and Fax Support Contacting Allied TelesynMail Support Returning ProductsFor Sales or Corporate Information FTP ServerTell Us What You Think Overview LED Duplex Mode Type of Connector10/100 Mbps Twisted Pair Ports SpeedAuto MDI/MDI-X Maximum DistanceMbps Fiber Optic Port Duplex Mode SwitchMaximum Distance MAC Address Table Introduction to Ethernet SwitchingFlow Control and Backpresure Store and ForwardDuplex Mode LED System LEDsAT-FS705E FC Network TopologiesEthernet Hub AT-FS706E FC AT-FS705E FC Ethernet Hubs Invalid Loop Topology Page Reviewing Safety Guidelines Installing the SwitchVerifying the Package Contents Installing the Twisted Pair and Fiber Optic Cabling Selecting a Site for the SwitchInstalling the Switch On a Table or Desktop Installing the Switch on a Wall Verifying and Troubleshooting the Installation AT-FS705E FC and AT-FS706E FC Installation Guide Weight Warranty Registration Technical SpecificationsUsing 50/125 µm fiber Page Translated Electrical Safety Emission Information Lightning Danger Electrical NoticesVorsicht Gefahr Durch BlitzschlagGevaar Voor Blikseminslag Fare Under UvejrVariotus Älä katso säteeseen Salamaniskuvaara Sähköön Liittyviä Huomautuksia Varoitus SähköiskuvaaraAvvertenze Elettriche Pericolo DI FulminiFare for Lynnedslag ElektrisitetAvisos Electricos Perigo DE Choque Causado POR RaioPeligro DE Rayos Fara FÖR Blixtnedslag Tillkännagivanden Beträffande ElektricitetsriskPage Incident Summary Technical Support Fax OrderPage AT-FS705E FC and AT-FS706E FC Installation Guide Feedback

ATFS705EFCSC60 specifications

The Allied Telesis ATFS705EFCSC60 is a robust and feature-rich network switch designed for small to medium-sized enterprises. Combining advanced networking technologies with versatility, this switch caters to the increasing demands for efficient and reliable network performance.

One of the main features of the ATFS705EFCSC60 is its support for Ethernet networking with a variety of port configurations. This switch features five 10/100/1000 Mbps Ethernet ports, providing high-speed data transmission capabilities. The inclusion of a gigabit capability ensures that network bottlenecks are minimized, enabling smooth data flow between connected devices, making it ideal for bandwidth-intensive applications such as video conferencing and large file transfers.

Moreover, the ATFS705EFCSC60 excels in Layer 2 switching capabilities. It supports vital functionalities like VLAN (Virtual Local Area Network) support, allowing network administrators to segment their network into different logical sections. This segmentation enhances security, reduces broadcast domains, and improves overall network performance. The switch also supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) to prevent loops within the network topology, ensuring reliable redundancy.

Another standout feature of the ATFS705EFCSC60 is its advanced management capabilities. It provides web-based management interfaces, which facilitate easy configuration and monitoring of the network switch. Network administrators can also utilize SNMP (Simple Network Management Protocol) for remote monitoring, allowing for real-time insights into the performance and health of the switch.

Power over Ethernet (PoE) support is another significant advantage of this switch. It allows the switch to deliver power to connected devices such as IP cameras, VoIP phones, and wireless access points through the Ethernet cable, eliminating the need for additional power sources. This feature simplifies installation and reduces clutter, making it an excellent choice for environments where power outlets are limited.

In terms of build and design, the ATFS705EFCSC60 is designed for reliability and durability. It features a robust chassis that can withstand various environmental conditions, making it suitable for different deployment scenarios. The switch’s fanless design also ensures silent operation, making it ideal for office environments.

In summary, the Allied Telesis ATFS705EFCSC60 is a high-performance network switch that blends performance, reliability, and advanced features. Its support for gigabit Ethernet, VLAN configuration, PoE capabilities, and comprehensive management options make it an excellent choice for businesses looking to enhance their network infrastructure. Whether used in a growing enterprise or as part of a point solution, the ATFS705EFCSC60 presents itself as a valuable asset in modern networking.
Top Page Image Contents