Allied Telesis ATFS705EFCSC60 manual Installing the Switch on a Wall

Page 31

AT-FS705E FC and AT-FS706E FC Installation Guide

The AT-FS705E FC switch has one 100FX DUPLEX switch for its one fiber optic port. The AT-FS706E FC switch has two switches for its two fiber optic ports.

7.Power ON the end nodes connected to the ports on the switch.

8.Check the LNK/ACTY LED for each port. The LED should be steady green or blinking. If a LNK/ACTY LED remains OFF, refer to “Verifying and Troubleshooting the Installation” on page 22 for assistance.

Installing the Switch on a Wall

The switch can be mounted either vertically or horizontally on a wall using the keyholes on the bottom of the chassis.

Note

For wall-mount installation, you must supply the two screws and plastic anchors or other material necessary to mount the device on the wall.

To install the switch on the wall, perform the following procedure:

1.Remove the rubber feet, all cables, and the DC power cord from the switch.

2.Select a wall location for the device.

3.Install two plastic anchors and two pan-head screws into the wall, separated by 100 millimeters (3.94 inches).

4.Position the device onto the wall screws. If you are mounting the switch horizontally, position the switch so that the ports are facing down and the LEDs are facing up. If you are mounting the switch vertically, position the switch so that the ports are facing to the left and the LEDs to the right.

5.Power ON the switch using the external power adapter supplied with the unit. Connect the external power adapter to an appropriate power source and the DC cable on the adapter to the DC connector on the switch.

The PWR LED on the switch’s front panel should be ON. If the LED remains OFF, refer to “Verifying and Troubleshooting the Installation” on page 22 for assistance.

Warning

The power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord.

9

￿

21

Page 30 Page 32
Image 31
Page 30 Page 32
Contents AT-FS705E FC AT-FS706E FC Page Industry Canada Electrical Safety and Emission Compliance StatementPage Table of Contents Technical Support Fax Order Incident Summary Welcome to Allied Telesyn Where to Find Web-based Guides Document ConventionsOnline Support Telephone and Fax Support Contacting Allied TelesynMail Support Returning ProductsFor Sales or Corporate Information FTP ServerTell Us What You Think Overview LED Speed Type of ConnectorDuplex Mode 10/100 Mbps Twisted Pair PortsAuto MDI/MDI-X Maximum DistanceMbps Fiber Optic Port Duplex Mode SwitchMaximum Distance MAC Address Table Introduction to Ethernet SwitchingFlow Control and Backpresure Store and ForwardDuplex Mode LED System LEDsAT-FS705E FC Network TopologiesEthernet Hub AT-FS706E FC AT-FS705E FC Ethernet Hubs Invalid Loop Topology Page Reviewing Safety Guidelines Installing the SwitchVerifying the Package Contents Installing the Twisted Pair and Fiber Optic Cabling Selecting a Site for the SwitchInstalling the Switch On a Table or Desktop Installing the Switch on a Wall Verifying and Troubleshooting the Installation AT-FS705E FC and AT-FS706E FC Installation Guide Weight Warranty Registration Technical SpecificationsUsing 50/125 µm fiber Page Translated Electrical Safety Emission Information Lightning Danger Electrical NoticesVorsicht Gefahr Durch BlitzschlagGevaar Voor Blikseminslag Fare Under UvejrVariotus Älä katso säteeseen Pericolo DI Fulmini Sähköön Liittyviä Huomautuksia Varoitus SähköiskuvaaraSalamaniskuvaara Avvertenze ElettricheFare for Lynnedslag ElektrisitetAvisos Electricos Perigo DE Choque Causado POR RaioPeligro DE Rayos Fara FÖR Blixtnedslag Tillkännagivanden Beträffande ElektricitetsriskPage Incident Summary Technical Support Fax OrderPage AT-FS705E FC and AT-FS706E FC Installation Guide Feedback

ATFS705EFCSC60 specifications

The Allied Telesis ATFS705EFCSC60 is a robust and feature-rich network switch designed for small to medium-sized enterprises. Combining advanced networking technologies with versatility, this switch caters to the increasing demands for efficient and reliable network performance.

One of the main features of the ATFS705EFCSC60 is its support for Ethernet networking with a variety of port configurations. This switch features five 10/100/1000 Mbps Ethernet ports, providing high-speed data transmission capabilities. The inclusion of a gigabit capability ensures that network bottlenecks are minimized, enabling smooth data flow between connected devices, making it ideal for bandwidth-intensive applications such as video conferencing and large file transfers.

Moreover, the ATFS705EFCSC60 excels in Layer 2 switching capabilities. It supports vital functionalities like VLAN (Virtual Local Area Network) support, allowing network administrators to segment their network into different logical sections. This segmentation enhances security, reduces broadcast domains, and improves overall network performance. The switch also supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) to prevent loops within the network topology, ensuring reliable redundancy.

Another standout feature of the ATFS705EFCSC60 is its advanced management capabilities. It provides web-based management interfaces, which facilitate easy configuration and monitoring of the network switch. Network administrators can also utilize SNMP (Simple Network Management Protocol) for remote monitoring, allowing for real-time insights into the performance and health of the switch.

Power over Ethernet (PoE) support is another significant advantage of this switch. It allows the switch to deliver power to connected devices such as IP cameras, VoIP phones, and wireless access points through the Ethernet cable, eliminating the need for additional power sources. This feature simplifies installation and reduces clutter, making it an excellent choice for environments where power outlets are limited.

In terms of build and design, the ATFS705EFCSC60 is designed for reliability and durability. It features a robust chassis that can withstand various environmental conditions, making it suitable for different deployment scenarios. The switch’s fanless design also ensures silent operation, making it ideal for office environments.

In summary, the Allied Telesis ATFS705EFCSC60 is a high-performance network switch that blends performance, reliability, and advanced features. Its support for gigabit Ethernet, VLAN configuration, PoE capabilities, and comprehensive management options make it an excellent choice for businesses looking to enhance their network infrastructure. Whether used in a growing enterprise or as part of a point solution, the ATFS705EFCSC60 presents itself as a valuable asset in modern networking.
Top Page Image Contents