Allied Telesis ATFS705EFCSC60 manual Verifying and Troubleshooting the Installation

Page 32

Note

To prevent the DC power cable from being inadvertently pulled out of the switch, use the cable tie supplied with the unit to secure the DC power cable to the small cable hook located next to the DC connector.

6.Connect the twisted pair cables to the RJ45 connectors on the switch.

7.Remove the dust cover from the fiber optic port and connect the fiber optic cable to the port.

8.Set the 100FX DUPLEX switch to either HALF for half-duplex or FULL for full-duplex operation. The capabilities of the end node connected to the fiber optic port will determine the correct setting for this switch. If the end node is capable of only half-duplex, set the switch to HALF. If the end node is capable of full-duplex, set the switch to FULL.

The AT-FS705E FC switch has one 100FX DUPLEX switch for its one fiber optic port. The AT-FS706E FC switch has two switches for its two fiber optic ports.

9.Power ON the end nodes connected to the ports on the switch.

10.Check the LNK/ACTY LED for each port. The LED should be steady green or blinking. If a LNK/ACTY LED remains OFF, refer to “Verifying and Troubleshooting the Installation.” for assistance.

Verifying and Troubleshooting the Installation

This section contains information on how to verify the installation of the switch and how to troubleshoot the unit in the event a problem occurs.

Check the PWR LED on the front of the switch. If the LED is OFF, indicating that the unit is not receiving power, do the following:

Make sure that the power adapter is securely connected to a power source and that the DC power cord on the adapter is securely connected to the DC power connector on the switch.

Verify that the power outlet has power by connecting another device to it.

Try connecting the unit to another power source.

GTry using another power adapter.

22

Page 31 Page 33
Image 32
Page 31 Page 33
Contents AT-FS705E FC AT-FS706E FC Page Electrical Safety and Emission Compliance Statement Industry CanadaPage Table of Contents Technical Support Fax Order Incident Summary Where to Find Web-based Guides Document Conventions Welcome to Allied TelesynContacting Allied Telesyn Online Support Telephone and Fax SupportReturning Products Mail SupportTell Us What You Think FTP ServerFor Sales or Corporate Information Overview LED Type of Connector Duplex Mode10/100 Mbps Twisted Pair Ports SpeedMaximum Distance Auto MDI/MDI-XDuplex Mode Switch Mbps Fiber Optic PortMaximum Distance Introduction to Ethernet Switching MAC Address TableStore and Forward Flow Control and BackpresureDuplex Mode System LEDs LEDNetwork Topologies AT-FS705E FCEthernet Hub AT-FS706E FC AT-FS705E FC Ethernet Hubs Invalid Loop Topology Page Installing the Switch Reviewing Safety GuidelinesVerifying the Package Contents Selecting a Site for the Switch Installing the Twisted Pair and Fiber Optic CablingInstalling the Switch On a Table or Desktop Installing the Switch on a Wall Verifying and Troubleshooting the Installation AT-FS705E FC and AT-FS706E FC Installation Guide Warranty Registration Technical Specifications WeightUsing 50/125 µm fiber Page Translated Electrical Safety Emission Information Electrical Notices Lightning DangerGefahr Durch Blitzschlag VorsichtFare Under Uvejr Gevaar Voor BlikseminslagVariotus Älä katso säteeseen Sähköön Liittyviä Huomautuksia Varoitus Sähköiskuvaara SalamaniskuvaaraAvvertenze Elettriche Pericolo DI FulminiElektrisitet Fare for LynnedslagPeligro DE Rayos Perigo DE Choque Causado POR RaioAvisos Electricos Tillkännagivanden Beträffande Elektricitetsrisk Fara FÖR BlixtnedslagPage Technical Support Fax Order Incident SummaryPage AT-FS705E FC and AT-FS706E FC Installation Guide Feedback

ATFS705EFCSC60 specifications

The Allied Telesis ATFS705EFCSC60 is a robust and feature-rich network switch designed for small to medium-sized enterprises. Combining advanced networking technologies with versatility, this switch caters to the increasing demands for efficient and reliable network performance.

One of the main features of the ATFS705EFCSC60 is its support for Ethernet networking with a variety of port configurations. This switch features five 10/100/1000 Mbps Ethernet ports, providing high-speed data transmission capabilities. The inclusion of a gigabit capability ensures that network bottlenecks are minimized, enabling smooth data flow between connected devices, making it ideal for bandwidth-intensive applications such as video conferencing and large file transfers.

Moreover, the ATFS705EFCSC60 excels in Layer 2 switching capabilities. It supports vital functionalities like VLAN (Virtual Local Area Network) support, allowing network administrators to segment their network into different logical sections. This segmentation enhances security, reduces broadcast domains, and improves overall network performance. The switch also supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) to prevent loops within the network topology, ensuring reliable redundancy.

Another standout feature of the ATFS705EFCSC60 is its advanced management capabilities. It provides web-based management interfaces, which facilitate easy configuration and monitoring of the network switch. Network administrators can also utilize SNMP (Simple Network Management Protocol) for remote monitoring, allowing for real-time insights into the performance and health of the switch.

Power over Ethernet (PoE) support is another significant advantage of this switch. It allows the switch to deliver power to connected devices such as IP cameras, VoIP phones, and wireless access points through the Ethernet cable, eliminating the need for additional power sources. This feature simplifies installation and reduces clutter, making it an excellent choice for environments where power outlets are limited.

In terms of build and design, the ATFS705EFCSC60 is designed for reliability and durability. It features a robust chassis that can withstand various environmental conditions, making it suitable for different deployment scenarios. The switch’s fanless design also ensures silent operation, making it ideal for office environments.

In summary, the Allied Telesis ATFS705EFCSC60 is a high-performance network switch that blends performance, reliability, and advanced features. Its support for gigabit Ethernet, VLAN configuration, PoE capabilities, and comprehensive management options make it an excellent choice for businesses looking to enhance their network infrastructure. Whether used in a growing enterprise or as part of a point solution, the ATFS705EFCSC60 presents itself as a valuable asset in modern networking.
Top Page Image Contents