Chapter 2: Installing the Hardware
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install the switches or any of their components.
Note
The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements”
Warning: Class 1 Laser product. L1
Warning: Do not stare into the laser beam. L2
Warning: To prevent electric shock, do not remove the cover. No
Warning: Do not work on equipment or cables during periods of lightning activity. E2
Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord. E3
Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. E4
Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible. E5
Caution: Air vents must not be blocked and must have free access to the room ambient air for cooling. E6
Warning: Operating Temperature. This product is designed for a maximum ambient temperature of 40° degrees C. E7
34