Allied Telesis AT-FH812U-SW, AT-FH824U-SW manual Rack-Mounting the Hubs

Page 14

Installation

Stacking Hubs on a Flat Surface

Rack-Mounting the Hubs

Connecting the Hub System

The hub can be stacked on a secure table or desktop.

1.Attach the self-adhesive rubber foot pads (that come with this package) on each of the 4 concave spaces located on the bottom of the first hub.

2.Place the first hub on a firm flat surface where you want to install the stack.

3.Repeat Step 1 for each hub before stacking them. The rubber foot pads cushion the hub against shock/vibrations and provide space between each hub for ventilation.

Please comply with the following instructions to ensure that your hub is securely mounted in the rack, as shown in Figure 2.

Figure 2 Rack-Mounting Hubs

1.Use a standard EIA 19-inch rack.

2.Use the brackets and screws supplied in the rack mounting kit.

3.Use a cross-head screwdriver to attach the brackets to the side of the hub.

4.Position the hub in the rack by lining up the holes in the brackets with the appropriate holes on the rack, and then use the supplied screws to mount the hub in the rack.

The hub has 12/24 RJ-45 ports, one of which also serves as a dual-speed (MDI/ MDI-X) daisy-chain port. All the repeater ports support 10 or 100 Mbps half-duplex connections.

4

Image 14
Contents AT-FH812u AT-FH824u AT-FH812u-SW AT-FH824u-SW Page Agency Compliance EMI CertificationSafety Compliance Voltage Cord Set SpecificationsTable of Contents Appendix B Where to Find Web-based Guides Document Conventions Welcome to Allied TelesynContacting Allied Telesyn Technical Support Mail SupportFor Sales or Corporate Information Page Introduction AT-FH812u Hub Front and Rear PanelsIntroduction Installation Pre-Installation RequirementsRack-Mounting the Hubs Making a Connection via an MDI-X Station Port Making a Connection via the MDI Daisy-Chain Port 10Base-T Cascade Configuration 100Base-TX Cascade Configuration Installing an Optional Module Agent Module Front Panel 100Base-FX Module Front Panel Powering on the Hub Verifying Port Status Verifying System Operation Troubleshooting Installation VerificationCabling Verification Pin Assignment Page Technical Specifications Base UnitNetwork Criteria1 AT-FH807u Uplink Module AT-FH808u Uplink Module Page Technical Support Fax Order Incident SummaryPage AT-FH800 Series Installation Guide Feedback

AT-FH812U-SW, AT-FH812U, AT-FH824U-SW, AT-FH824U specifications

The Allied Telesis AT-FH824U and AT-FH812U series possess outstanding features suitable for various network requirements. These models are designed to deliver reliable performance, security, and ease of management for modern networking environments.

The AT-FH824U is an 8-port Fast Ethernet switch, engineered to provide high-speed connectivity for small to medium-sized networks. It supports a variety of media types and has 24 Gigabit Ethernet ports, which allow for seamless integration with existing network infrastructures. The device employs a non-blocking architecture, ensuring that data packets are routed efficiently without bottlenecks. Each port can automatically negotiate speeds between 10/100 Mbps, making it versatile for various devices. The switch also provides advanced features such as VLAN support, enabling network segmentation for improved performance and enhanced security.

Similarly, the AT-FH824U-SW variant adds an important layer to network management with its smart features. This managed switch version allows network administrators to monitor and control traffic flow through simple GUI interfaces or command-line SNMP management. The integration of Quality of Service (QoS) capabilities ensures that critical applications receive priority bandwidth, enhancing overall network efficiency.

On the other hand, the AT-FH812U is a more compact model with 12 Fast Ethernet ports. Ideal for smaller office environments, it delivers reliable networking with the same level of performance as its larger counterparts. It also supports IEEE 802.1Q for VLAN tagging, providing improved network functionality and security. This switch can be mounted in a standard rack or placed on a desktop, adding to its versatility.

The AT-FH812U-SW incorporates managed functionality, allowing users to access advanced settings and configurations. With features such as loop prevention, broadcast storm control, and port mirroring, it offers the robustness needed for more complex networking scenarios.

Allied Telesis switches are built with energy-efficient technology, minimizing power consumption without compromising performance. Enhanced security protocols including port security and access control lists make these switches suitable for businesses focused on safeguarding their networks against unauthorized access.

Overall, the AT-FH824U, AT-FH824U-SW, AT-FH812U, and AT-FH812U-SW models offer a blend of technology and performance, catering to the diverse needs of modern network infrastructures. These switches deliver scalability, manageability, and security, making them an ideal choice for various networking applications.