Chapter 2 - Hardware Installation
10.Place the MCU in a 23” rack and while supporting it, screw the mounting brackets to the rack securing it with bolts and
When the unit is installed on a rack, the rack must be properly grounded to the central office ground. The rack must be grounded with
Mounting the MGC+100 on a 19” Rack
The MGC+100 can be mounted in a 19” rack using the mounting kit (P/N- KIT2026A). It is highly recommended that the 19” rack be located in an air- conditioned room.
When the MGC+100 unit is installed on a 19” rack, environment temprature should not exceed 35°C or 95°F.
Figure 2-3 shows how to mount the MGC+100 on the 19” rack.
19" Attachment Bar
| Line 1 | Line 2 | Line 3 | Line 4 | Line 5 | Line 6 | Line 7 | Line 8 |
|
|
|
|
| Line 1 | Line 2 | Line 3 | Line 4 |
|
|
|
|
|
|
|
| Power In Out |
|
|
|
|
|
|
|
| Power In Out |
MOC YOL P | MGC+ |
|
|
|
|
|
| Power In Out |
