Polycom DOC2238A To install the MPI-4/8 Network Interface Module, MPI Box rack mounting options

Chapter 2 - Hardware Installation

MCUs in	MPI Boxes	MPI Boxes
23" Rack	in 23" Rack	in 19" Rack

Mounting

Plate

Figure 2-11: MPI Box rack mounting options

To install the MPI-4/8 Network Interface Module:

1.Slide the MPI-4/8 Network Interface module into a free slot in the MGC front panel.

2.Push the MPI-4/8 Network Interface module firmly into the Backplane, making sure it is properly seated in its slot.

3.Tighten the screws on the front panel of the MGC-100 that secure the MPI-4/8 Network Interface module.

2-22