MGC+ Hardware and Installation Manual

6.Once the, Server panel, Main Control Module, the power supply module and the boards are removed, unscrew the side screws from inside the MGC+50, and then remove the plate from both MGC+50 sides.

front

Remove plate

7.To remove the plate from the right side of the MGC+ unit remove the appropriate number of functional modules to allow access to the screws.

8.From the inside of the MGC+50, screw the mounting bracket to the side of the MGC+50, securing the screws in the mounted nuts.

2-29

Page 49
Image 49
Polycom DOC2238A manual Front Remove plate