Chapter 4 - Hardware Description
Power Module in the MGC+50
In the MGC+50, the Power Supply Module is not hot swappable. The power supply automatically senses the AC input voltage.
The capacities of the power supply module are shown in Table
Table
Voltage (V) | Maximum current (Amp.) |
|
|
5 | 120 |
|
|
12 | 13 |
|
|
.5 | |
|
|
Power Supply Cord
The MGC+100 and the MGC+50 use only power supply cords supplied by Polycom Inc.or equivalent UL approved cable, rated at a current of up to 15 A, depending on country standards, for its AC power supply. The following specifications are for both the MGC+100 and MGC+50.
Circuit Breaker (AC Power)
Currently, MGC+100 and MGC+50 Control Units come equipped with a circuit breaker.
Table
MGC+ 50 | MGC+100 |
|
|
AC Voltage - 10Amp at 100 | AC Voltage - 15 Amp at 100 VAC |
VAC, 5 Amp at 240 VAC | and 7.5 Amp at 240 VAC |
protected by a 15 Amp circuit | protected by a 15 Amp circuit |
breaker. | breaker. |
|
|