MGC+ Hardware and Installation Manual

8.Referring to the labels, reconnect the external connections to the I/O card.

Replacing the Power Supply Modules on the MGC+100

The Power Supply Modules are hot swappable and can be replaced with the system running. Use the following procedure to replace a faulty Power Supply Module:

1.Unscrew the 4 screws on the front panel of the MGC+100 that secure the Power Supply Module.

2.Pull on the handle on the plastic panel of the Power Supply Module to pull the module out of its slot in the Powerplane.

3.Carefully slide the Power Supply Module out through the front panel.

4.Slide in the replacement Power Supply Module.

5.Push the Power Supply Module firmly into the Powerplane making sure it is properly seated in its slot.

6.Tighten the 4 screws on the front panel of the MGC+100 that secure the Power Supply Module.

Replacing the Power Supply Module on the MGC+50

The Power Supply Module is not hot swappable and cannot be replaced with the system running. Use the following procedure to replace a faulty Power Supply Module:

1.If the MCU is working, exit the MGC+ Manager application and turn off the MCU. Otherwise, skip this step.

2.Unplug the MCU from the AC outlet.

5-11

Page 143
Image 143
Polycom DOC2238A manual Replacing the Power Supply Modules on the MGC+100, Replacing the Power Supply Module on the MGC+50