Allied Telesis 86251-08 manual Create IP Igmp Destination

Page 67

Patch 86251-08 For Rapier Series Switches

CREATE IP IGMP DESTINATION

67

CREATE IP IGMP DESTINATION

Syntax CREATE IP IGMP DESTINATION=ipaddress INTERFACE=interface [PORT={ALLport-list}]

where:

■ipaddress is an existing IGMP group destination address.

■interface is the name of the interface over which multicast data is forwarded.

■port-listis a port number, a range of port numbers (specified as a-b), or a comma separated list of port numbers and/or ranges. Port numbers start at 1 and end at m, where m is the highest numbered Ethernet port, including uplink ports.

Description This command creates a static multicast association to forward multicast data from a multicast group to one or more ports.

The DESTINATION parameter specifies the IP address from where multicast data is forwarded.

The INTERFACE parameter specifies the interface over which multicast data is forwarded.

The static IGMP association identified by the DESTINATION and INTERFACE parameters must not already exist.

The PORT parameter specifies the ports through which multicast data is forwarded. If any of the ports specified in the port list are not valid ports for the specified interface, an error message is displayed. An empty port list can be specified by giving no value to the PORT parameter. Ports may be added later using the ADD IP IGMP DESTINATION command. If ALL is specified, or if the PORT parameter is not entered, all ports belonging to that interface will forward multicast data.

Since static IGMP associations are identified by the combination of destination and interface, one destination or interface may belong to several different associations. Also, ports may belong to several associations if there are overlapping VLANs. There is no conflict with existing standard (dynamic) IGMP hosts: if a new static association’s port already has a dynamic IGMP host, the new static entry will replace it.

IGMP destinations added with this command will never time out. They are removed with the DESTROY IP IGMP DESTINATION command.

Examples To forward multicast data to 224.1.2.3 out ports 1 to 4 using vlan1, use the command:

CREATE IP IGMP DESTINATION=224.1.2.3 INTERFACE=VLAN1 PORT=1-4

See Also ADD IP IGMP DESTINATION

DESTROY IP IGMP DESTINATION

Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I

Image 67

Contents Introduction Patch For Rapier Series SwitchesPCR Module BGP Level FeaturesPCR Module IPG Level PCR 03359 Module Core LevelPCR Module FIRE, Utility Level PCR 03684 Module Core LevelPCR Module TTY, User Level PCR Module STP LevelPCR Module Firewall Level PCR Module Isakmp LevelPCR Module Ipsec Level PCR Module SW56 LevelPCR Module Utility Level PCR Module SWI LevelPCR Module IGP Level PCR 31001 Module Dhcp LevelPCR Module BGP Level PCR 31098 Module Dhcp Level PCR 31081 Module VRRP, IP, TCP, TelnetPCR Module File Level PCR Module FFS LevelPCR Module IPG PCR 31106 Module MLD LevelPCR Module IPX2 Level PCR 02414 Module IPV6, SWI, IPG, VlanPCR Module ETH, IPG, IPv6, IPX Level PCR Module OSPF, IPG LevelPCR 03751 Module Mlds Level PCR 03801 Module Mlds Level PCR Module FILE, INSTALL, SCR LevelPCR Module Install Level PCR Module ETH LevelPCR 03843 Module Dhcp Level PCR 03823 Module Vlan LevelPCR Module TTY Level PCR Module IPG, IPV6 LevelPCR 03870 Module SWI, Vlan Level PCR Module DHCP, Telnet LevelPCR Module IP ARP Level PCR Module Switch LevelPCR Module Ikmp Level PCR Module Firewall Network affecting No PCR Module L2TP Level PCR Module Ospf Network affecting NoPCR Module PPP Level PCR Module PRI LevelPCR 03515 Module Dhcp Level PCR Module HTTP, Firewall Level PCR Module BGP, TCP LevelPCR 03547 Module Dhcp Level PCR Module Http Level PCR 03584 Module MLD Level PCR Module FIREWALL, IPG LevelPCR Module Ping Level PCR 03618 Module Dhcp Level PCR 03615 Module Load LevelPCR Module STP, SWI Level PCR 03647 Module Snmp Level PCR 03708 Module Dhcp Level PCR Module PKI LevelPCR 03691 Module Dvmrp Level PCR 03698 Module Dvmrp LevelPCR Module IP Level PCR Module PPP, VJC LevelPCR Module Rsvp Level PCR Module Vrrp LevelFeatures PCR Module IPSEC, Ikmp Level PCR 03371 Module Dhcp LevelPCR Module SSL Level PCR 03429 Module SWI, Vlan Level PCR 03405 Module Stream LevelPCR 03410 Module VLAN, Core Level PCR 03424 Module Dhcp LevelPCR Module FR Level PCR 03436 Module IP, Dhcp LevelPCR Module IPX Level PCR 03443 Module Dhcp LevelPCR 03465 Module Dhcp Level PCR Module BGP, Firewall Level PCR 03492 Module HTTP, Load LevelPCR 03515 Module Dhcp Level PCR 03094 Module STP, Vlan Level PCR 02577 Module IPG, LOG LevelPCR Module GUI Level PCR 03089 Module Core LevelPCR Module Classifier Level PCR 03096 Module Vlan LevelPCR Module PIM, DVMRP, IPG Level PCR 03109 Module LOG LevelPCR Module Port Level PCR Module ETH, IPG LevelPCR Module IPG, SWI Level PCR Module Cure LevelPCR Module PCI Level PCR 03153 Module ACC LevelPCR 03167 Module Dvmrp Level PCR Module User Level PCR Module CORE, FFS, TTY LevelPCR Module FIREWALL, LB Level PCR Module LB LevelPCR 03229 Module Load Level PCR 03205 Module Dhcp LevelPCR Module SWI, IPG, PIM Level PCR 03239 Module QOS LevelPCR 03247 Module MVR Level PCR Module VLAN, IPG Level PCR 03256 Module MLD LevelPCR Module DHCP, Q931, Telnet Level PCR Module IP, SWI Level PCR 03334 Module MVR LevelPCR 03336 Module Core Level PCR 03346 Module Snmp LevelVlan PCR 03370 Module MVR LevelPCR 03388 Module Dhcp Level ADD PPP Create PPP Delete PPP SET PPP Show PPP PCR Module IPV6 Network affecting No PCR 03067 Module Dhcp LevelPCR 03068 Module SWI, QOS Level PCR 03077 Module Core LevelPCR Module IPG, ETH Network affecting No PCR Module SWI Network affecting NoPCR Module IPG Network affecting No PCR Module PCI Network affecting NoPCR Module TM Network affecting No Availability Icmp Router Discovery AdvertisementsPCR Module TELNET, PING, IPV6, Network affecting No PCR Module TCP Network affecting NoRouter Advertisement Messages To change these settings, use one of the commands ADD IP Interface SET IP Interface Disable IP Advertise Enable IP AdvertiseADD IP Advertise Interface Delete IP Advertise Interface SET IP Advertise Interface Show IP Advertise Example output from the Show IP Advertise commandSame subnet Adopting the Vrrp IP Address MLD Snooping Ping Polling of Device Reachability Down device unreachable Icmp Redirect Enable and Disable Icmp MessagesDisable IP Icmpreply CommandsShow IP Icmpreply Static IgmpConfiguration Example Show IP Igmp CommandsSee Also Show IP Igmp Debug ADD IP Igmp Destination Create IP Igmp Destination Destroy IP Igmp Destination Delete IP Igmp DestinationEnable IP Igmp Debug Disable IP Igmp DebugShow IP Igmp Debug Checking the Port Map on Rapier16fi SwitchesHow to check that the port map is correct How to restore the correct port map Force Eprom download Y ? PPPoE Client on Vlan InterfacesADD PPP Create PPP SET PPP Delete PPPShow PPP VLANn-servicename, TNL- callnameShow PPP