APC NBES0302 installation instructions Inventory, Installation

NetBotz® Door Switch Sensor for Rooms or Third- Party Racks (NBES0302)—Installation Instructions

Inventory

Door switch sensor with	#4 x 1/2-in screw (4)	63.5-mm (2.5-in) dual
15.24-m (50-ft) cable (1)		adhesive tape (2)

203-mm (8-in) tie wrap (20) Adhesive cable tie holder (10) RJ-45 coupling (1)

Installation

Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz products. See your NetBotz product documentation for details.

Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling.

Note: Use adhesive cable tie holders and tie wraps to secure the sensor cable.