ATEN Technology CL-1216 Selected Port LED, Firmware Upgrade Switch During normal operation

Page 15

 

 

Introduction

 

 

 

1

Handle

Pull to slide the KVM module out; push to slide the module

 

 

in (see item 13 in this table).

 

 

 

2

LCD Display

After sliding the KVM module out, flip up the cover to

 

 

access the LCD monitor.

 

 

 

3

LCD Controls

The LCD On/Off switch is located here, as well as buttons

 

 

to control the position and picture settings of the LCD

 

 

display. See p. 19, for details.

 

 

 

4

Port Switches

Press a switch to bring the KVM focus to the computer

 

 

attached to its corresponding port. See p. 21 for details.

 

 

 

5

Port LEDs

Two Port LEDs are built into the Port Switches. The one on

 

 

the left is the On Line LED; the one on the right is the

 

 

Selected Port LED:

M An On Line LED lights ORANGE to indicate that the computer attached to its corresponding port is up and running.

M A Selected LED lights GREEN to indicate that the computer attached to its corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see p. 38).

6Keyboard

7Touchpad

8

Power LED

Lights BLUE to indicate that the unit is receiving power.

9

Rack Mounting

The rack mounting tabs located at each corner of the unit

 

Tabs

secure the chassis to a system rack. Refer to the Appendix

 

 

(p. 60), for rack mounting details.

 

 

 

10

Lock LEDs

The Num Lock, Caps Lock, Scroll Lock LEDs are located here.

 

 

 

11

Reset Switch

Located to the right of the Lock LEDs. Press this recessed

 

 

switch in with a thin object to perform a system reset.

 

 

 

12

Firmware

M Firmware Upgrade Port: The Firmware Upgrade Cable

 

Upgrade

that transfers the firmware upgrade data from the

 

Section

administrator’s computer to the CL-1208 / CL-1216 plugs

 

 

into this RJ-11 connector.

 

 

M Firmware Upgrade Switch: During normal operation

 

 

this switch should be in the NORMAL position. (See p. 49

 

 

for firmware upgrading details.)

 

 

 

13

Slide Release

In order to bring the console out, you must first release it by

 

 

sliding these tabs to the inside. See p. 17 for details on

 

 

sliding the console in and out.

 

 

 

7

2005-04-26

Image 15
Contents CL-1208 CL-1216 2005-04-26 Packing List Basic PackageOptional Equipment 2005-04-26 Table of Contents Hotkey Operation Overview About This ManualConventions Overview Introduction2005-04-26 Features Function CS Part Number Hardware RequirementsComputers CablesIntroduction CL-1208 / CL-1216BL Front View Selected Port LED Firmware Upgrade Switch During normal operationCL-1208 / CL-1216 Rear View For details. Do not attempt to use ordinary 15 pin 2005-04-26 Before you Begin Single Stage Installation2005-04-26 Daisy Chaining 2005-04-26 CL-1216 ACS-1216A 2005-04-26 Opening the Console Basic OperationClosing the Console LCD OSD Configuration LCD ButtonsButton Function Setting Explanation Adjustment SettingsPort Selection Manual Port SwitchingSwitching Station Positions Hot PluggingHot Plugging CPU Ports Powering Off and Restarting Port ID Numbering OSD Overview OSD OperationWEB Server SN-PN OSD NavigationOSD Main Screen Headings Heading ExplanationF1 Goto OSD FunctionsChoice Meaning F2 ListSetting Function F3 SETScroll Lock Scroll Lock or Ctrl Ctrl SCAN/SKIP CommandMode ScanF4 ADM + / . and Space Ports AccessibleSET Quick View PortsFirmware ResetUpgrade Station IDSF5 SKP F6 BRC F7 Scan F8 Lout 2005-04-26 Invoking Hotkey Mode Hotkey Port AccessPress Enter Selecting the Active PortAuto Scanning Setting the Scan IntervalInvoking Auto Scan Skip Mode Hotkey Beeper Control Hotkey Summary Table 2005-04-26 Firmware Upgrade Utility Preparation Starting the Upgrade 2005-04-26 Firmware Upgrade Utility Upgrade Failed Upgrade SucceededFirmware Upgrade Recovery 2005-04-26 MVs Connection TablesCL-1208 + ACS-1208A CL-1216 + ACS-1216ASetting Default OSD Factory Default SettingsClear Login Information Standard Rack Mounting Rack MountingOptional Rack Mounting Left Appendix Function CL-1208 CL-1216 SpecificationsTroubleshooting Limited WarrantyProblem Solution

CL-1216, CL-1208 specifications

ATEN Technology has consistently advanced the realm of digital communication and computer connectivity, providing innovative solutions that cater to various environments. Among its esteemed product lineup are the CL-1216 and CL-1208 KVM over IP switches. These devices exemplify ATEN's commitment to enhancing operational efficiency and providing robust management capabilities.

The CL-1216 and CL-1208 are designed to facilitate remote access and control of multiple servers or devices from a single console, a necessity in today's fast-paced IT environments. The numbers in their names indicate their capabilities, with the CL-1216 allowing access to 16 servers and the CL-1208 catering to 8 servers. This functionality is especially valuable for data centers, server rooms, and IT departments that require constant oversight and management of numerous systems.

One of the standout features of these KVM switches is their ease of use. They come equipped with a user-friendly web-based interface, allowing admins to manage server access seamlessly from anywhere with internet connectivity. This eliminates the traditional barriers of physical proximity, enabling IT personnel to handle issues remotely, thereby reducing downtime and improving productivity.

In terms of technology, both models integrate advanced 1920x1200 resolution video support, ensuring high-quality image transmission, which is crucial for visual monitoring and management. They support various video formats, providing versatility to different operational setups. Moreover, they are equipped with USB keyboard and mouse support, which allows a smooth user experience when managing connected systems.

Another significant characteristic of the CL-1216 and CL-1208 is their enhanced security features. They support advanced encryption protocols and user authentication, ensuring that only authorized personnel can access the connected servers. This level of security is crucial in preventing unauthorized access and safeguarding sensitive information.

Furthermore, these devices are designed with reliability in mind, featuring robust construction and the ability to operate effectively in various environmental conditions. They also offer multiple user access levels, enabling organizations to manage permissions and roles efficiently.

In conclusion, the ATEN CL-1216 and CL-1208 KVM over IP switches provide powerful, user-friendly solutions for remote server management. With their high-resolution video support, robust security features, and ease of use, they represent a significant step forward in IT management technology, ensuring enterprises can maintain control and oversight in an increasingly digital landscape.