ATEN Technology CL-1208, CL-1216 user manual F4 ADM

CL-1208 / CL-1216 User Manual

F4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting	Function
SET	This function is used to set Usernames and Passwords for the
USERNAME	Administrator and Users:
AND
PASSWORD	1. One Administrator and four User passwords can be set.
	2. After you select the Administrator field or one of the User fields,
	a screen that allows you to key in your username and
	password appears. The username and password may be up
	to 15 characters long, and can consist of any combination of
	letters and numbers (A - Z, 0 - 9).
	3. For each individual, key in the Username and Password, then
	press [Enter].
	4. To modify or delete a previous Username and/or Password,
	use the backspace key to erase individual letters or numbers.
SET LOGOUT	If there is no input from the console for the amount of time set
TIMEOUT	with this function, the Operator is automatically logged out. A login
	is necessary before the console can be used again.
	This enables other Operators to gain access to the computers
	when the original Operator is no longer accessing them, but has
	forgotten to log out. To set the timeout value, key in a number
	from 1 - 180 minutes, then press [Enter]. If the number is 0 [zero],
	this function is disabled. Default is 0 (disabled).

(Table continues on next page)

32

2005-04-26