Components
Front View:
1 & 2
1.Port Selection Switches
M Press a switch to give the KVM focus to the system attached to its corresponding port.
M Pressing Buttons 1 and 2 simultaneously for 3 seconds starts Auto Scan Mode (see p. 10).
M While in Auto Scan Mode, pressing either button exits Auto Scan Mode and switches the KVM focus to its corresponding port.
2.Port LEDs
The Port LEDs are built into the Port Selection Switches. A lit LED indicates that its corresponding Port is the one that has the KVM focus.
Depending on the Port’s status, the LED may flash according to a specific pattern (see the table on p. 10 for details).
-5 -