ATEN Technology CS-1708 user manual Power LED

CS-1708 / CS-1716 User Manual

1. Port LEDs:

The Port LEDs provide status information about their corresponding CPU Ports. There is one pair of LEDs for each Port. The one on the left is the On Line LED; the one on the right is the Selected Port LED:

wAn On Line LED lights ORANGE to indicate that the computer attached to its corresponding port is up and running.

wA Selected LED lights GREEN to indicate that the computer attached to its corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see p. 35).

wWhen the CS-1708 is first powered on, the On Line and Selected LEDs blink in sequence as the Switch performs a self-test.

2.Reset Switch:

Pressing this switch in performs a system reset. The switch is recessed and must be pushed with a thin object - such as the end of a paper clip, or a ball point pen.

3. Power LED:

The Power LED lights to indicate that the CS-1708 is powered up and ready to operate.

4. Station ID LED:

The CS-1708’s Station ID is displayed here. If this is a Single Station installation (see p. 9), or the First Station on a Daisy Chained installation (see p. 11), the CS-1708 has a Station ID of 01.

On a Daisy Chained installation, the CS-1708 auto-senses its position and displays the Station ID that corresponds to its place in the chain. (see Port ID Numbering, p. 14 for details).

6.

2004-04-27