(F3 SET: continued)
Setting | Function |
PORT ID | Selects how the Port ID is displayed: the Port Number alone |
DISPLAY | (PORT NUMBER); the Port Name alone (PORT NAME); or the |
MODE | Port Number plus the Port Name (PORT NUMBER + PORT |
| NAME). The default is PORT NUMBER + PORT NAME. |
|
|
SCAN | Determines how long the focus dwells on each port as it cycles |
DURATION | through the selected ports in Auto Scan Mode (see p. 35). Key in a |
| value from 1 - 255 seconds, then press [Enter]. Default is 5 |
| seconds; a setting of 0 disables the Scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Auto Scan Mode |
MODE | (see p. 35). Choices are: ALL - All the Ports which have been set |
| Accessible (see p. 31); POWERED ON - Only those Ports which |
| have been set Accessible and are Powered On; QUICK VIEW - |
| Only those Ports which have been set Accessible and have been |
| selected as Quick View Ports (see p. 31); QUICK VIEW + |
| POWERED ON - Only those Ports which have been set Accessible |
| and have been selected as Quick View Ports and are Powered On. |
| The default is ALL. |
| Note: The Quick View choices only show up on the Administrator’s |
| screen, since only he has Quick View setting rights (see p. 31, for |
| details). |
|
|
SCREEN | If there is no input from the console for the amount of time set with |
BLANKER | this function, the screen is blanked. Key in a value from 1 - 30 |
| minutes, then press [Enter]. A setting of 0 disables this function. |
| The default is 0. |
|
|
HOTKEY | Enables / Disables the Hotkey function (see p. 15) in case there is |
COMMAND | a conflict with programs running on the computers. On enables the |
MODE | function, Off disables it. The default is On. |
|
|
HOTKEY | Selects which keys invoke Hotkey Mode (see p. 15): |
| [Num Lock] |
|
|
28.