Once scanning begins, it continues until you press the [Spacebar] to exit Auto Scan Mode. The port that has the KVM focus at the time scanning stopped remains active.
Note: While Auto Scan Mode is in effect, the console will not function normally. You must exit Auto Scan Mode (by pressing the [Spacebar]) in order to regain normal control of the console.
MHotkey Summary Table
Combination | Action |
[LCtrl] [LCtrl] or | Toggles access between the computers. (Default) |
[RCtrl] [RCtrl] |
|
|
|
[Scroll Lock] [Scroll Lock] | Toggles access between the computers. (Alternate) |
|
|
[LShift] [RShift] | Starts Auto Scan Mode. Keying in a number from 1 |
| to 4 while Auto Scan Mode is in effect changes the |
| scan interval. |
|
|
[Spacebar] | Exits Auto Scan Mode. |
- 11 -