Starting Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1.Invoke Hotkey Mode with the [NumLock] +
2.Key in [A]
After you press A, you automatically exit Hotkey Mode, and enter Auto Scan Mode.
3.To exit Auto Scan Mode, press [Esc] or [Spacebar]
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended - only Auto Scan Mode compliant keystrokes and mouse clicks can be input. You must exit Auto Scan Mode in order to regain normal control of the console.
wSkip Mode
This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular port for as long or as little as you like - as opposed to Auto Scanning, which automatically switches after a fixed interval. To invoke Previous/Next Switching, key in the following Hotkey combination:
1.Invoke Hotkey Mode with the [NumLock] +
2.Key in [Arrow]
Where [Arrow] refers to the left or right Arrow key. After you press [Arrow], you automatically exit Hotkey Mode, and enter Skip Mode where you can switch ports as follows:
←Skips from the current port to the first accessible port previous to it. (See Scan/Skip Mode, p. 21, for information regarding accessible ports.)
→Skips from the current port to the next accessible port.
↑Skips from the current port to the last accessible port of the previous Station.
↓Skips from the current port to the first accessible port of the next Station.
Note: 1. Once Skip Mode has been invoked, until you exit, you can keep on skipping simply by pressing an Arrow key. You don’t have to use the [NumLock] +
2.While Skip Mode is in effect, ordinary keyboard and mouse functions are suspended - only Skip Mode compliant keystrokes can be input. You must exit Skip Mode in order to regain normal control of the console.
3.To exit Skip Mode, press [Esc]
14 |