ATEN Technology ACS-1208L user manual F4 ADM

Page 26

wF4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices for you to select from appears. Double Click the choice you want, or move the Highlight Bar to then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting

Function

SET

This function is used to set Usernames and Passwords for the

USERNAME

Administrator and Users:

AND

 

PASSWORD

1. One Administrator and four User passwords can be set.

 

2. After you select one of the User fields or the Administrator field,

 

a screen that allows you to key in your password appears. The

 

password may be up to 12 characters long, and can consist of

 

any combination of letters and numbers (A - Z, 0 - 9).

 

3. For each individual, key in the Username and Password, then

 

press [Enter].

 

4. To modify or delete a previous Username and/or Password,

 

use the backspace key to erase individual letters or numbers.

 

 

SET LOGOUT

If there is no input from the console for the amount of time set

TIMEOUT

with this function, the Operator is automatically logged out. A

 

login is necessary before the console can be used again. This

 

enables other Operators to gain access to the computers when

 

the original Operator is no longer accessing them, but has

 

forgotten to log out. To set the timeout value, key in a number

 

from 1 - 180 minutes, then press [Enter]. If the number is 0

 

[zero], this function is disabled. Default is 0 (disbabled).

 

 

(Table continues on next page)

22

ACS-1208L / ACS-1216L User Manual

2002-01-15

Image 26
Contents ACS-1208L ACS-1216L 2002-01-15 Packing List Contents Overview Features Cables Hardware RequirementsComputers Function CS Part NumberHandle IntroductionACS-1208L / ACS1216L Front View CoverLocking Tabs Rack Mounting BracketsLCD Display Controls Daisy Chain Port Power PortACS-1208L / ACS1216L Rear View CPU Port SectionBefore you Begin InstallationSingle Station Installation Daisy Chaining ACS-1216L Operation Powering Off and RestartingSwitching Station Positions Hot PluggingPort ID Numbering Port SelectionHotkey Port Control Invoking Hotkey ModeHotkeys Auto Scanning Setting the Scan IntervalSelecting the Active Port Skip Mode Starting Auto ScanCombination Action Hotkey Beeper ControlHotkey Summary Table OSD Operation OSD OverviewHeading Explanation OSD NavigationOSD Main Screen Headings SN-PNOSD Functions F1 GotoF2 List Choice MeaningSetting Function F3 SETScan CommandMode SCAN/SKIPF4 ADM + / . and Space SET Quick AccessibleReset View PortsF5 SKP F6 BRCF7 Scan F8 LoutACS-1216L Computer Connection Table AppendixACS-1208L Computer Connection Table MVs ComputersRemoving the KVM Module Setting Default OSD Factory Default SettingsTroubleshooting Symptom Possible Cause ActionSpecifications Function ACS-1208L ACS-1216LLimited Warranty