ATEN Technology ACS-1208L Hotkey Beeper Control, Hotkey Summary Table, Combination Action

Page 19

Hotkey Beeper Control

The Beeper (see Activate Beeper, p. 23) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:

1.Invoke Hotkey Mode with the [NumLock] + [-] combination

2.Key in [B]

After you press [B], the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.

Hotkey Summary Table

Combination

Action

[Num Lock] + [-]

[Port ID] [Enter]

Switches access to the computer that corresponds

 

 

to that Port ID.

 

 

 

 

[T] [n] [Enter]

Sets the Auto Scan interval to n seconds - where n

 

 

is a number from 1 - 255.

 

 

 

 

[A]

Invokes Auto Scan Mode.

 

 

 

 

[←]

Invokes Skip Mode and skips from the current port

 

 

to the first accessible port previous to it.*

 

 

 

 

[→]

Invokes Skip Mode and skips from the current port

 

 

to the next accessible port.*

 

 

 

 

[↑]

Invokes Skip Mode and skips from the current port

 

 

to the last accessible port of the previous Station.*

 

 

 

 

[↓]

Invokes Skip Mode and skips from the current port

 

 

to the first accessible port of the next Station.*

 

 

 

 

[B]

Toggles the Beeper On or Off.

*Once Skip Mode has been invoked, until you exit, you can keep on skipping simply by pressing an Arrow key. You don’t have to use the [NumLock] + [-] combination again.

ACS-1208L / ACS-1216L User Manual

15

2002-01-15

Image 19
Contents ACS-1208L ACS-1216L 2002-01-15 Packing List Contents Overview Features Function CS Part Number Hardware RequirementsComputers CablesCover IntroductionACS-1208L / ACS1216L Front View HandleLCD Display Controls Rack Mounting BracketsLocking Tabs CPU Port Section Power PortACS-1208L / ACS1216L Rear View Daisy Chain PortSingle Station Installation InstallationBefore you Begin Daisy Chaining ACS-1216L Hot Plugging Powering Off and RestartingSwitching Station Positions OperationPort Selection Port ID NumberingHotkeys Invoking Hotkey ModeHotkey Port Control Selecting the Active Port Setting the Scan IntervalAuto Scanning Starting Auto Scan Skip ModeHotkey Summary Table Hotkey Beeper ControlCombination Action OSD Overview OSD OperationSN-PN OSD NavigationOSD Main Screen Headings Heading ExplanationF1 Goto OSD FunctionsChoice Meaning F2 ListF3 SET Setting FunctionSCAN/SKIP CommandMode ScanF4 ADM + / . and Space View Ports AccessibleReset SET QuickF6 BRC F5 SKPF8 Lout F7 ScanMVs Computers AppendixACS-1208L Computer Connection Table ACS-1216L Computer Connection TableRemoving the KVM Module Symptom Possible Cause Action OSD Factory Default SettingsTroubleshooting Setting DefaultFunction ACS-1208L ACS-1216L SpecificationsLimited Warranty