Linksys SD216, SD208 manual Connecting Network Devices, Placement Options

Page 6

Connecting Network Devices

Follow these instructions for the 5-, 8-, and 16-Port 10/100 Switches (the 5-Port 10/100 Switch is shown in Figures 3-2 and 3-3).

1. Make sure all the devices you will connect to the Switch are powered off.

Placement Options

Set the Switch on its four rubber feet. For the 8- or 16-Port 10/100 Switch, you can choose to hang it on a wall using its wall-mount slots. To use this option, follow these instructions:

2.Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch.

3.Connect the other end to a PC or other network device.

4.Repeat steps 2 and 3 to connect additional devices.

5.Connect the supplied power adapter to the power port on the Switch’s side panel.

Note: Make sure you use the power adapter included with the Switch. Using a different power adapter may result in damage to the Switch.

Figure 3-2

Figure 3-3

1.The wall-mount slots are two crisscross slots on the Switch’s bottom panel, as shown in Figure 3-4. Attach two screws to the wall, so that the Switch’s wall-mount slots line up with the two screws.

2.Maneuver the Switch so the screws are inserted into the two slots.

Congratulations!

 

The installation of the 10/100

Figure 3-4

Switch is complete.

 

For help with the installation or operation of the 10/100 Switch, contact Linksys Technical Support at one of the phone numbers listed on the

6.Plug the other end of the adapter into a power outlet.

7.Power on the devices connected to the Switch. Each active port’s corresponding LED will light up on the Switch.

Proceed to the following section, “Placement Options.”

Technical Support insert or one of the Internet addresses below:

E-mail: Europe

europe-support@linksys.com

United Kingdom & Ireland

uks@linksys.com

Latin America

latam-soporte@linksys.com

For unlisted regions or the most up-to-date contact information, please visit the website below:

Website

http://www.linksys.com/international

8

9

Image 6
Contents 10/100 Switches Table of Contents Copyright & Trademarks FCC StatementGetting to Know the 10/100 Switch IntroductionConnecting the 10/100 Switch PowerMaximum Cabling Distances Connecting Network Devices Placement OptionsProceed to the following section, Placement Options Appendix a Specifications EnvironmentalAppendix B Warranty Information Limited WarrantyTable des matières Copyright & Marques DE CommerceChapitre 1 Introduction Chapitre 2 Présentation du commutateur 10/100Planification de la configuration du réseau Présentation Chapitre 3 Branchement du commutateur 10/100Distances maximales de câblage Options d’emplacement Passez à la section « Options d’emplacement »Branchement des périphériques réseau Annexe a Spécifications Conditions environnementalesAnnexe B Garantie Garantie LimiteeInhalt Copyright & MarkenEU-KONFORMITÄTSERKLÄRUNG Europa Kapitel 2 Beschreibung des 10/100 Switch Kapitel 1 EinführungKapitel 3 Anschließen des 10/100 Switch NetzstromMaximale Kabellängen Anschließen von Netzwerkgeräten StandortoptionenAnhang a Spezifikationen UmgebungsbedingungenAnhang B Garantieinformationen Eingeschränkte GewährleistungIndice Copyright E MarchiCapitolo 2 Introduzione allo switch 10/100 Capitolo 1 IntroduzioneCapitolo 3 Collegamento dello switch 10/100 Distanze massime dei caviAndare alla sezione seguente, Opzioni di posizionamento ’installazione dello switch 10/100 è completataCollegamento dei dispositivi di rete Opzioni di posizionamentoAppendice a Specifiche Specifiche ambientaliAppendice B Informazioni sulla garanzia Garanzia LimitataÍndice Direitos DE Autor E Marcas ComerciaisCapítulo 1 Introdução Capítulo 2 Conhecer o Comutador 10/100Capítulo 3 Ligar o Comutador 10/100 Planear a disposição da rede Descrição geralDistâncias máximas dos cabos Parabéns Terminou a instalação do Ligar dispositivos de redeOpções de colocação Comutador 10/100Apêndice a Especificações técnicas AmbienteApêndice B Informações sobre a garantia Garantia LimitadaContenido Copyright Y Marcas RegistradasCapítulo 1 Introducción Capítulo 2 Familiarización con el conmutador 10/100Alimentación Planificación del diseño de la red Descripción generalDistancias máximas de cableado Enhorabuena Ha finalizado la instalación del Conexión de dispositivos de redOpciones de colocación Conmutador 10/100Apéndice a Especificaciones Información medioambientalApéndice B Información de garantía Garantía LimitadaCopyright 2003 Cisco Systems, Inc. All Rights Reserved

SD208, SD216 specifications

The Linksys SD216 and SD208 are powerful and versatile managed switches designed to meet the needs of small to medium-sized enterprises seeking reliable network solutions. Both models offer robust performance, ease of use, and advanced features that help enhance connectivity and optimize data traffic.

The Linksys SD216 is equipped with 16 ports, while the SD208 comes with 8 ports, making them ideal for various network configurations and setups. These switches use Gigabit Ethernet technology, ensuring data transmission speeds of up to 1 Gbps. This high-speed capability allows for seamless operations in environments with high bandwidth demands, such as video streaming, online gaming, and large file transfers.

One of the standout features of both the SD216 and SD208 is their support for Power over Ethernet (PoE). This technology enables the switches to deliver power to connected devices, such as IP cameras, access points, and VoIP phones, eliminating the need for additional power sources and reducing cable clutter. This functionality is particularly beneficial for organizations looking to streamline installations and reduce overall costs.

In terms of management, the SD216 and SD208 support both basic and advanced management features. Users can manage their networks through a user-friendly web interface that allows for easy configuration of VLANs, link aggregation, and port mirroring. These features enhance network performance, improve security, and provide detailed insights into traffic flow.

The switches also incorporate innovative technologies such as Quality of Service (QoS), which prioritizes critical applications and ensures that essential data packets are transmitted with minimal latency. This is especially important for businesses that rely on real-time communication and data transfer.

Moreover, both models are designed with energy efficiency in mind, enabling them to operate with reduced power consumption without sacrificing performance. This eco-friendly approach not only lowers operational costs but also contributes to a smaller carbon footprint.

With their sturdy designs, easy integration, and wide range of features, the Linksys SD216 and SD208 switches provide exceptional value for businesses looking to enhance their network infrastructure. Whether used in an office, a retail environment, or a facility with heavy data usage, these switches deliver reliable performance and scalability to support future growth.