Linksys EFAH05W, EFAH24, EFAH16W, EFAH08W manual

Page 19

The following illustration is an example of how to connect four EtherFast 10/100 Auto-Sensing hubs together using the Single-Port 100BaseTX Distance Extender Module. Note that, without the distance extender mod- ule, the maximum distance between two uplinked hubs is 5 meters (16.4 feet). With the distance extender module installed on one of the hubs, the maximum distance becomes 100 meters (328 feet). Only one distance extender module is needed for the long-distance uplink to be activated.

Regular Uplink 5 meters Maximum

Distance Extender Uplink 100

meters Maximum (Regular

Straight-Through Cable)

Regular Uplink 5 meters Maximum

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EtherFast 10/100 Auto-Sensing Hubs Copyright & Trademarks Contents About This Guide IntroductionAbout Fast Ethernet Planning Your Network Front and Back Panels 100/10 Col LED IndicatorsOptional Fiber Optic Expansion Module Connecting Nodes to the Auto-Sensing HubMounting the Hub Uplinking the Hub Uplinking the 5-Port Hub Resetting the Hub Powering On the HubTwisted Pair Cabling AppendixHow To Install An Add-On Module Fiber Optic Modules Cable type Module in Hub a Module in hub B 16/50 Maximum distance Meters 16 meters 100BaseTX Distance Extender Module Page Ports SpecificationsCustomer Support T p / / w w w. l i n k s y s . c o m
Top Page Image Contents