Powering On the Hub
Desktop Model
The hub comes with both a power adapter and in some instances, an AC electrical cord. Plug the power adapter’s plug into the hub’s power jack. Plug the provided AC electrical cord into the power adapter. Finally, plug the other end of the electrical cord into a standard AC electrical outlet. The hub will put itself through a series of diagnostic tests
Rack Mountable Model
To power on the hub, plug the supplied AC electrical power cord into the back of the hub. Turn on the hub. The hub will put itself through a series of diagnostic tests
Resetting the Hub
To reset the hub, turn the unit off for at least three seconds and then turn it back on.
If you have a rack mountable model, you can use the reset button in the back of the hub to run the reset power cycle. Use a small screwdriver or other pointy object that can fit through the hole on the back of the unit and reach the button. Hold the button for 2 or 3 seconds, then let go. The hub is reset.
Note: If you power cycle the hub or hold down the reset button for too long, you may lose some connections.
10