LED Indicators
Power | Indicates that the hub is receiving power. |
100/10 Col | Indicates if collisions are being encountered at |
| 100Mbps and/or 10Mbps. Some collisions are |
| normal. If your network seems to be experienc- |
| ing high collision levels, verify that your |
| cabling is good, and that there are no cabling |
| coils, |
100 | ON if a given port is operating at 100Mbps; OFF |
| if the port is running at 10Mbps. |
Link/Act | ON or flickering if a given port is sending or |
| receiving data; OFF if the port is not con- |
| nected to a node. |
FX1/FX2 | ON if the hub’s optional expansion module is |
| installed. Flickering when receiving or transmit- |
| ting data. FX2 is on when a |
| being used, FX1 is on when a |
| |
| models only). |
SW (EFAH05 only) | ON if uplink port is in 100Mbps/100 meter |
| Distance Extender mode. |
|
|
6