Delete All Records

User can delete the records of the private phonebook, shared phonebook, call log, redial list, services number and SMS messages by resetting the respective menu.

Press . Use to select RESET.

Press . Use to select from PRIV PBOOK, SHARED PBOOK, CALL LOG, REDIAL LIST, SERVICES or SMS MESSAGES.

Press . The display will show RESET?.

Press to confirm.

Note: If PRIV PBOOK is reset, the quick dial feature of all quick dial keys will be automatically off.

If SERVICE is reset, factory pre-programmed services, if any, will be restored.

If SMS MESSAGES is reset, all SMS messages, if any, will be deleted.

Reset Factory Default

All settings for both the handset and base can be restored to the factory defaults by this menu.

Press . Use to select RESET.

Press . Use to select SETTINGS. Press .

The display reads PIN?. Enter the correct PIN of the connected

base. Press .

All settings will be restored to the factory defaults.

Note: Factory default settings can’t be restored on the base or on the handset alone. Also, if you want to restore factory settings on other handset currently connected to the same base, you will need to restore factory setting on that handset.

Using Additional Handsets

Registration

Each additional S6050 handset purchased separately must go through the registration process with the base. Each handset can be registered to up to 4 base units and each base can be registered to up to 5 handsets.

When registering, each handset can select base number for the base to be registered so that it can be identified at base selection setting.

To register:

Press . Use to select SYSTEM.

Press . Use to select REGISTER.

Press . The display will read BS 1 2 3 4. If the handset has been registered to a base, the number of the registered base will be flashing.

Enter the number of the base unit you wish to register using the numeric key. The entered base number will be displayed on the second line.

Press . The handset will read PIN?.

Enter the PIN number of the base to be registered (maximum 8 digits, the default PIN is 0000).

Press and hold the PAGE button on the base unit until you hear 2 beeps.

36 of 42

Page 36
Image 36
Oricom S6000 manual Using Additional Handsets, Delete All Records, Reset Factory Default, Registration