•You can exit the conference call by pressing 
on the handset or place the handset on the cradle. The other handset and the
external call will still be connected. The 
and 
icons will be turned off.
Room Monitoring
When more than one handset is registered to the same base unit, one of the handsets can be used as a room (baby) Monitor device.
To activate:
•Press 
. Use 
to select FEATURES.
•Press 
. Use 
to select MONITOR.
•Press 
. Use 
to select ON.
•Press 
to confirm.
MONITOR will flash on the display to indicate the handset is in monitor mode during standby. User can make internal call to this handset from another handset, the microphone on this handset is activated (being in monitor mode) and noise from the room can be heard. User can also
press 
to hear from the speaker. There will be no internal ringing.
To
•Press 
will take you to the MONITOR menu directly.
•Press 
. The display reads ON.
•Press 
to select OFF.
•Press 
to confirm.
Note: The handset under monitor mode will not ring when an external call comes in.
De-register a Handset
One handset can
•Press 
. Use 
to select SYSTEM.
•Press 
. Use 
to select DELETE HS.
•Press 
.
•Use 
to select the desired handset (HANDSET 1 to HANDSET 5) to be deleted.
•Press 
to confirm the selection. The display will read PIN?.
•Enter the correct PIN of the connected base and press 
to confirm the deletion of the handset.
Note: Each handset can’t
39 of 42
